Search the Community
Showing results for tags 'e6440'.
Welcome to the E6440 Owner's Lounge! A place to share tips/tricks/mods with other owners get the most satisfying user experience from this exceptional notebook. Release date: Sep 2013 Model name: Compal LA-9931P (iGPU) or LA-9932P (HD8690M) http://www.youtube.com/watch?v=KvbzGXOz3nU Example user-customized E6440 systems ordered by CPU performance User CPU clock TDP x27-TDP Storage: 9.5mm primary + ODD bay + mSATA Other mods komoornik i7-4940MX 3.1 57W 512GB SSD + BD-ROM FHD_LCD_retrofit, 16GB DDR3L Atonus i7-4810MQ 2.8 47W 250GB+2560B RAID0 Samsung EVO SSDs EC_retrofit, RAID unlock, 16GB DDR3L planetburns i7-4810MQ 2.8 47W 180GB SSD + ODD Tech Inferno Fan i7-4800MQ 2.7 47W 32.3 500GB SSHD + ODD EC_retrofit, GTX770 eGPU, OC_ME_FW PURPLE - highest performance AND lowest power consumption in this tableRED - highest performance configuration in this tableGREEN - lowest power consumption in this tablex27-TDP: TDP when running at x27 reflecting overall CPU temps and efficiency as discussed Operating System, Support, Drivers, Disassembly Guide Dell's E6440: Driver's link, Manuals link and Upgrade parts link. Windows 7 Dell OEM Source : Includes additional Dell installation content needed for a fully licensed Win7 clean install.Dell warranty checker: useful to check an ebay secondhand unit's remaining warranty. Ask vendor for the Support Tag.Performance upgrade: mSATA SSDYes, there is a mSATA slot in the E6440, though is not visible when taking the rear cover off. It needs the left bumper cap removed. It's situated above the WWAN marking as shown in the spoiler below. In fact, this slot is WLAN(PCIe1), mSATA (SATA3 port4) and WWAN (USB 2.0)!! Sharing the PCIe and SATA lines being a new Series-8 Flexible I/O chipset feature : http://forum.techinferno.com/diy-e-gpu-projects/6882-series-8-flexible-usb3-pcie-sata-pcie-i-o-some-more-x2-2-0-possibility.html#post94382 Performance upgrade: i7-quad CPUCan effectively double the CPU performance going from a factory i5/i7 dual core to a i7-quad CPU. Note: warranty implications of a CPU upgrade - a factory-specced faster dual core up to i7-4610M will not void warranty while a i7-quad will void the warranty if Dell know about it as it wasn't offered with one. I'd keep the original CPU back and swap it back in if necessary. Upgraded E6440 i7-quad system examples are shown in the table above.One important consideration is whether to get a 37W i7-4702MQ (4-core turbo=2.9Ghz)to keep within the factory-configured CPU's TDP or get a faster and hotter 47W i7-4800QM/i7-4700MQ (4-core turbo=3.5/3.2Ghz). I'm of the opinion that the 37W one should be avoided. That's because (1) the 47W CPUs can be software limited to 37W (2) XTU/Throttlestop allows a negative offset voltage offset to be applied bringing TDP down and allowing higher multipliers to work and (3) the beefier dGPU-model heatsink that can handle the higher TDP and can be retrofitted to the iGPU-only model.The E6440 BIOS locks the TDP but allows extra turbo bins are accessible using either Throttlestop or XTU. Eg: a i7-4700MQ has +200Mhz unlocked turbo bins (max=3.4Ghz 4-core). A i7-4800MQ has +400Mhz unlocked turbo bins (max=3.9Gbz 4-core). Problem with the 47W TDP limit is it limits performance to 3.5Ghz during a TS 32M/1024M 4-core load test. That result being *after* voltage optimization in XTU/Throttlestop. Meaning then that max performance lies between a turbo unlocked i7-4700MQ (3.4Ghz) and i7-4800MQ (3.9Ghz). Eg: a i7-4710MQ (3.5Ghz 4-core) would be at max TDP limits. Though those newer CPUs are rarer and often pricer than a faster i7-4800MQ. Means then that for the majority of users, a i7-4800MQ gives an easy plug'n'play installation from which highest performance, within TDP and thermal limits, can then be extracted easily using Throttlestop or XTU.RECOMMENDED reading: 1. http://forum.techinferno.com/throttlestop-realtemp-discussion/6958-haswell-step-backwards-ivy-bridge-i-have-some-shocking-tdp-results.html#post951812. INFO: dGPU_heatsink - improve iGPU model cooling by retrofitting dGPU model heatsink+fanPerformance upgrade: external graphics (eGPU)RECOMMENDED reading: INFO: EC_retrofit - retrofitting an expresscard slot to a E6440An eGPU has been implemented on a E6440 using a NVidia GTX770 (Tech Inferno Fan), AMD R9 280X (Tech Inferno Fan).DIY eGPU: attach a desktop videocard via the E6440's 5Gbps expresscard slot. Provides accelerated gaming graphics, CUDA/OpenCL processing and additional HDMI/DVI outputs to drive multiple monitors. A NVidia or AMD card is a straight plug-n-play implementation on a E6440. The system must boot least once with the eGPU attached and detected by the BIOS. This lowers TOLUD from 3.49GB to 3.24GB, storing it in NVRAM thereafter. Both my GTX770 and R9 280x can then be allocated without any error 12. In addition, no PCI Reset Delay mechanism is unnecessary and is best to be disabled. Then the system and eGPU can support a sleep-resume cycle with eGPU activate on resume. NOTE: The A.02 BIOS handles the eGPU beautifully, running a Gen2 expresscard link. Unfortunately bios A.05 or newer sets the EC port to Gen1 speed if you hotplug the eGPU after BIOS boot (see details). Flash back to A.02 to get the faster Gen2 link speed OR disable any PCI Reset Delay mechanisms on the eGPU adapter so the BIOS sees the eGPU on boot. Note: E6440 iGPU-model can boot with powered eGPU powered plugged into EC slot. dGPU-model E6440 will not boot with powered eGPU plugged into EC slot and so requires hotplugging after boot. In case anybody is wondering, a x2 2.0 eGPU link is not electrically possible unless there is a USB3 port 4 on a docking connector so can use the http://forum.techinferno.com/diy-e-gpu-projects/6882-series-8-flexible-usb3-pcie-sata-pcie-i-o-some-more-x2-2-0-possibility.html#post94382 feature. The USB 3 ports on the system are 1, 2, 3 and 6. The E6440 PCIe port layout is shown in the spoiler: If want to experiment with a x2 2.0 eGPU implementation then suggest look at a one-gen older Dell E6430. It's has two mPCIe ports (port 1 + 2) as per the E6430 schematic. System mod: LCD upgradeUpdate Feb-2015: newer E6440 has eDP rather than LVDS connected on the systemboard, with a 1920x1080 LCD option. See details. The FHD LCD retrofit parts required for the 1st E6440 series are in the spoiler: NOTE: The Intel iGPU Control panel mistakenly lists the LCD as being eDP as explained in the series-1 E6440.768P->900P is possible as a user upgrade. Required is swapping the HD 1ch LVDS cable for the 2ch LVDS HD+ and of course changing the 768P LCD for a 900P one. The two different LVDS cables available for a E6440 are: The two different LCDs being: My system came from the factory with a 900P AUO B140RTN02.2 panel with Dell p/n 0M4RTT. I find brightness and viewing angles quite satisfactory. A photo of my 900P LCD's model labelling is in the spoiler below. 1080P or higher resolution : not possible since the E6440 uses a LVDS rather than eDP internal LCD interface. The max resolution available in 14" LVDS is usually 1600x900, representing 37% more viewing area than 1366x768. Though ebay has 14" 1680x945 LVDS LCDs, giving an additional 10% more viewing area over 1600x900 or 51% over 1366x768. --> 1680x945 LCD does not fit correctly as attempted here.System mods: coolingINFO: dGPU_heatsink - improve iGPU model cooling by retrofitting dGPU model heatsink+fan. Useful if see i7-quad thermal throttling under full 4-core load. MISC infoRAID_unlock: Enabling E6440's hidden RAID BIOS options (Atonus) giving RAID-0/1 and maybe RAID-5 as discussed.Using a ramdisk for browser cache (phillofoc) : to extend battery lifeI present you a tool to decompress Dell UEFI BIOS (JimboBobB@MDL) - extract the raw E6440 BIOS file from Dell's distribution EXE. Confirmed works. A workaround to the depreciated "-writehdr" option.Modifying UEFI variables : eg: remove CPU TDP power limits, RAID/Expresscard/max TOLUD, disable dGPU Dell E6440 reviews Review Dell Latitude E6440 Notebook (notebookcheck.net)Review Dell Latitude E6440 (itfroccs.hu)Dell Latitude E6440 (youtube #1)Dell Latitude E6440 Notebook (youtube #2)
I've been trying to get my eGPU setup working for a couple of days now. So far, I have a GTX 570 attached via an exp gdc beast (expresscard version) to my Dell Latitude e6440. There are no errors reporting in device manager and it reads "This device is working properly." Despite this, I cannot seem to get my system to play nice with the card. I have the standard Windows automatically-installed drivers right now and if I install nvidia drivers for the card, the install succeeds, but device manager reports an error 43. With just the system default drivers installed, Windows will not detect any monitors attached to the GPU. I also do not see the eGPU in dxdiag, though I'm not sure if I'm suppose to, as this is my first attempt at such a setup. I am running Windows 10 Pro 64bit with latest updates. I have not found any posts similar to this issue and any help would be greatly appreciated. Thank you.