Specs :- Intel i5-2410m 2.3 GHz
8 GB ram
Intel hd 3000 (igpu)
AMD hd 6470m (dgpu)
Win 10
# Use the mpcie slot for egpu
GPU powers on and Epu setup 1.x recognized the graphics card.
Disabled the dgpu using setup 1.x.
Installed latest crimson drivers
In device manager gpu shows with error 43. Disabled the egpu from device manager and re-enabled it again. Then it showed normally.
BUT THE PROBLEM IS I CANT CONNECT IT INTO A EXTERNAL DISPLAY. i USED THE DVI-SINGLE LINK PORT AND THE HDMI PORT BUT MY MONITOR DOESNT PICK UP THE SIGNAL.
Help required !!!!
01. First look at the Device manager.
02. After re-enabling the gpu