LightBaron
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by LightBaron
-
-
Hi,
I have got a problem with my diy eGPU.
I have an EXP GDC Beast V8.0 with an M-PCIE interface.
My laptop (Asus X54H) specs:
Intel Core i5-2520m
8GB Ram DDR3 1600mhz
AMD 6470m (7400m series)
HM65 Chipset
GPU Palit GTX 960 2GB
Windows 7 64 Bit
I made a DSDT override and to get my eGPU working i have to switch it with my Wi-Fi card in sleep mode.
Now I see my GTX960 working in device manager but i don't know how to use it because when i try to put a monitor in the DVI Port it says no signal and Nvidia Settings says that there isn't a monitor connected.
P.S.
1) If i power on my egpu before windows loading it freeze loading on the windows 7 logo.
2) I power my eGPU with a 500w ATX. All cables are connected (ATX cables, gpu 6 pin cable from exp gdc interface and hdmi-mpcie cable).
3) Already tried using EXP GDC switches but with no results.
4) I tried disabling my dGPU from device manager (i can't from bios) but if i do it i can't get to sleep mode!
5) In device manager there isn't my iGPU Intel HD 3000.
Hope you can help me!
Thanks!
eGPU External monitor NO SIGNAL
in DIY e-GPU Projects
Posted
I solved.
I was using a broken cable.
I've got another problem now.
If i power on my laptop with my egpu connected it hangs on Windows loading and then give me BSOD.
If i power on my eGPU after loading it freeze all and laptop fan spin fast.
If i power my egpu in sleep mode my laptop doesn't see it.
The only method i can use to get my eGPU work is to put Wi-Fi card, then put my laptop in sleep mode and then switch Wi-Fi card with eGPU powered on.
Is there a solution for this?