Hi,
I have got a problem with my diy eGPU.
I have an EXP GDC Beast V8.0 with an M-PCIE interface.
My laptop (Asus X54H) specs:
Intel Core i5-2520m
8GB Ram DDR3 1600mhz
AMD 6470m (7400m series)
HM65 Chipset
GPU Palit GTX 960 2GB
Windows 7 64 Bit
I made a DSDT override and to get my eGPU working i have to switch it with my Wi-Fi card in sleep mode.
Now I see my GTX960 working in device manager but i don't know how to use it because when i try to put a monitor in the DVI Port it says no signal and Nvidia Settings says that there isn't a monitor connected.
P.S.
1) If i power on my egpu before windows loading it freeze loading on the windows 7 logo.
2) I power my eGPU with a 500w ATX. All cables are connected (ATX cables, gpu 6 pin cable from exp gdc interface and hdmi-mpcie cable).
3) Already tried using EXP GDC switches but with no results.
4) I tried disabling my dGPU from device manager (i can't from bios) but if i do it i can't get to sleep mode!
5) In device manager there isn't my iGPU Intel HD 3000.
Hope you can help me!
Thanks!