Major Lazer

Thanks Prema, just to confirm, P870DM-G.BIN corresponds to EUROCOM SKY X9E?

Hi Prema, The system is not reacting at all to this... tried connecting the flash drive to different ports, but still nothing. Is there any possibility that this might not be the correct bios version? Thanks,

Alright alright, those renamed files were actually next to the original P870DM-G.BIN file on the same flash, but still nothing... Thanks for the XTU tip, now if i could get it running i might do something about it...

Thanks Prema on your quick feedback! I've downloaded and renamed P870DM-G.BIN from your link to P870DM-G.rom and P870DMG.rom, but my system is not reacting still... Am I doing this correctly? When you mention XTU, it actually started in around same time as when I installed the XTU... so that might be a problem.

Hi there, I’ve been experiencing some issues with my Sky X9E that is several months old and would kindly ask for someone to help out if they’ve had a similar experience… The thing is that recently it started behaving strangely. It would suddenly fire up all of its fans to the maximum and start beeping. It would go on for a minute until it shuts down… at first it was happening very rarely, but since a week ago it started doing that every time I turn it on. No matter what I tried, it kept on doing it… I’ve restored default settings in bios, installing and re-installing different aps, removed battery… nothing. Every time same thing happens. It doesn’t matter if I’m overloading the system with some rendering (I’m using the machine for video production purposed…) or just browsing the net. Sometimes it would start within a minute from turning it on and sometime after 10-15 minutes... even if I go to bios it would happen… Check it out how it looks here: https://www.youtube.com/watch?v=vyHTa0n8BJs Now comes the bad part… Being annoyed extremely by this and the fact I had a project that I needed to deliver soon, I figured I should maybe try to update bios… that seemed like only reasonable option. I’ve found P870DM-G BIOS version 1.05.07 (My system is with G-sync and 2 980m graphic cards), then made a bootable DOS flash drive and decided to go ahead and flash the bios… What happened is that the flashing process was interrupted by my machine reacting in the same way as previously mentioned and it shut down in the middle of the process… And of course, my system is bricked now… But here is the funny part, even though it is bricked, it still behaves in the same way… monitor doesn’t turn on, but after a minute or two, fans again fire up and after a minute it turns off, but now it is not beeping. Take a look here: https://www.youtube.com/watch?v=Lbl5F_7ufyM I’ve tried to place a stock bios and fn+B while turning on and machine would turn off itself and back on, but nothing would happen. Anyway, does anyone here has any experience like this or advise what can be done? Any kind of help would be much appreciated! Thanks,