LocalIdentity

I've been trying unsuccessfully to flash the vbios on my Metabox P650RE-G. I've tried flashing with nvflash and keep encountering the message:

 

"Identifying EEPROM...
EEPROM ID (C8,4011) : GD GD25Q10 2.7-3.6V 1024Kx1S, page

ERROR: ROM image too large for EEPROM"

 

Even though the file I am attempting to flash is only 189KB. I've even tried flashing the stock vbios which is 188KB and that gives the same error. The the only change in the ROM's is that I altered some settings in Maxwell Bios Tweaker.

I'm not sure if I'm meant to clear the EEPROM or doing something else. 

 

Any and all help is apprecieated

 

 CMD LOG-------------------------------------------------------------------------------------------------------------

c:\GPU Overclock>nvflash --protectoff

NVIDIA Firmware Update Utility (Version 5.236)
Modified Version by Joe Dirt

Adapter: GeForce GTX 970M     (10DE,1618,1558,6543) H:--:NRM S:00,B:01,PCI,D:00,F:00

The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.

Identifying EEPROM...
EEPROM ID (C8,4011) : GD GD25Q10 2.7-3.6V 1024Kx1S, page
Setting EEPROM software protect setting...
Remove EEPROM write protect complete.

c:\GPU Overclock>nvflash -6 1.rom

NVIDIA Firmware Update Utility (Version 5.236)
Modified Version by Joe Dirt

Checking for matches between display adapter(s) and image(s)...

Adapter: GeForce GTX 970M     (10DE,1618,1558,6543) H:--:NRM S:00,B:01,PCI,D:00,F:00

WARNING: Firmware image PCI Subsystem ID (10DE.0000)
  does not match adapter PCI Subsystem ID (1558.6543).

Please press 'y' to confirm override of PCI Subsystem ID's:
Overriding PCI subsystem ID mismatch
Current      - Version:84.04.8C.00.14 ID:10DE:1618:10DE:0000
               GM204 Board (Normal Board)
Replace with - Version:84.04.8C.00.2E ID:10DE:1618:10DE:0000
               GM204 Board (Normal Board)

Update display adapter firmware?
Press 'y' to confirm (any other key to abort):
The display may go *BLANK* on and off for up to 10 seconds or more during the update process depending on your display adapter and output device.

Identifying EEPROM...
EEPROM ID (C8,4011) : GD GD25Q10 2.7-3.6V 1024Kx1S, page

ERROR: ROM image too large for EEPROM