LocalIdentity

I've been trying unsuccessfully to flash the vbios on my Metabox P650RE-G. I've tried flashing with nvflash and keep encountering the message: "Identifying EEPROM... EEPROM ID (C8,4011) : GD GD25Q10 2.7-3.6V 1024Kx1S, page ERROR: ROM image too large for EEPROM" Even though the file I am attempting to flash is only 189KB. I've even tried flashing the stock vbios which is 188KB and that gives the same error. The the only change in the ROM's is that I altered some settings in Maxwell Bios Tweaker. I'm not sure if I'm meant to clear the EEPROM or doing something else. Any and all help is apprecieated CMD LOG------------------------------------------------------------------------------------------------------------- c:\GPU Overclock>nvflash --protectoff NVIDIA Firmware Update Utility (Version 5.236) Modified Version by Joe Dirt Adapter: GeForce GTX 970M (10DE,1618,1558,6543) H:--:NRM S:00,B:01,PCI,D:00,F:00 The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device. Identifying EEPROM... EEPROM ID (C8,4011) : GD GD25Q10 2.7-3.6V 1024Kx1S, page Setting EEPROM software protect setting... Remove EEPROM write protect complete. c:\GPU Overclock>nvflash -6 1.rom NVIDIA Firmware Update Utility (Version 5.236) Modified Version by Joe Dirt Checking for matches between display adapter(s) and image(s)... Adapter: GeForce GTX 970M (10DE,1618,1558,6543) H:--:NRM S:00,B:01,PCI,D:00,F:00 WARNING: Firmware image PCI Subsystem ID (10DE.0000) does not match adapter PCI Subsystem ID (1558.6543). Please press 'y' to confirm override of PCI Subsystem ID's: Overriding PCI subsystem ID mismatch Current - Version:84.04.8C.00.14 ID:10DE:1618:10DE:0000 GM204 Board (Normal Board) Replace with - Version:84.04.8C.00.2E ID:10DE:1618:10DE:0000 GM204 Board (Normal Board) Update display adapter firmware? Press 'y' to confirm (any other key to abort): The display may go *BLANK* on and off for up to 10 seconds or more during the update process depending on your display adapter and output device. Identifying EEPROM... EEPROM ID (C8,4011) : GD GD25Q10 2.7-3.6V 1024Kx1S, page ERROR: ROM image too large for EEPROM