Hello,
I'm hoping that someone can help me so I can get my eGPU working. My laptop installed my egpu 780TI via hotswap(I had to boot with wifi card installed, sleep computer, and swap with egpu m-pcie, wake the computer and install drivers). But when it restarts after installing drivers, I have a black screen on both my laptop monitor and external display. I've noticed that if I have it connected while the laptops booting, the wifi touch button stays off and i cannot turn it on. But when i connect the wifi card for startup and boot, the light comes on as normal and when i hot swap the m-pcie connector in during sleep mode, it stays on when I wake the computer. It then shows the 780TI in the device manager but won't display anything on the external display or use the780ti on the laptop display. Side Note: nvidia control panel won't open either. Even after I use DDU and repeat the process. I'm thinking it's a whitelisting problem which is why I'm wondering if Setup 1.30 would help or am just missing something? My laptop is a Valkryie CZ-17 and I don't have the dGPU installed. I removed it because it burnt out. Any help is appreciated. Thank you so much.