Hi Tech Inferno Fan, I have an adapter PE4C with a GTX 560Ti connected to a mPCIe port. I have also purchased the egpu setup 1.30 but know I don't know what to do next. The egpu is being detected, all the drivers are loaded and fully working (no errors of any kind on device manager), and the egpu setup is installed correctly but there is no video output signal from my graphic card. My graphic card is connected to a TV with a mini HDMI adapter (it has no HDMI port) and I know is it not a hardware issue ( graphic card has been tested and it is working). Can you please tell me if I have to modify anything on the egpu setup? My laptop is Acer Aspire M5. I have tried some things like doing a 32, 36, and 64-bits PCI compaction to the IGPU and EGPU and it doesn't seems to work. Also if I do a PCI compation to "all the PCI device except for Sata, xxxx, xxxx, xxxx, etc" it gives and error with the options "Abort, Retry, and Fail". To be honest I don't fully understand what PCI compation does. I was just following some youtube videos. I'm running the chainload on MBR mode. I hope you can help me. Thanks in advance!!