GPTeles

Sorry bother you guys again, but i would love to know what does this red ligh means: Thank you again guys

Is there a guide to what to do with the Setup 1.30? Thank you very much for your help.

nope ;-;

In the BIOS i don`t have, as expected, anything about ExpressCard or PCI Express, and i don`t know how to use the EFI variables (if it is to boot in the UEFI mode i didn`t work either). I did what you asked, I entered Sleep, connect the cable and then when I turned on the coolers of the graphic cards started spinnig for 1 sec than stoped and the laptop shutdown. He turned himself on again, now the coolers spinned a bit more before the laptop shutdown again. Finally he turned on with the same problem of the black screen. When I hot-plug the adapter the screen goes white and the laptop shutdown. I'm running on Windows 10 and about mine graphic card extra supply power (6-pin), i`m using the adapter that came with the EXP GDC, not the 6-pin that have with the PSU, well i`ve tried both but the result was the same.

Thank you for the awnser! The PTD didn`t work. The "samsung" logo appears on the external monitor. This is mine PSU: (sorry for the bad image) How can I know if I have control over mine PCIe speed? And what is Gen1, how can I run it? Thank you much.

Hello guys, this is mine first post on techinferno so if i made a mistake i`m sorry. I buyed a EXP GDC BEAST from banggood a week ago, I`ve been trying to make this work for the whole week. That`s the problem: I have a Samsung NP350E5C-A02US, which I believe isn`t whitelisted, I do all the procedure, unnistal wi-fi driver, unistall graphics driver, connect the PCI-e and turn on the computer. And that`s when shit happens. First of all there is a red light on the 6-pin of the eGpu board and there is nothing then a black screen on the computer, i`ve tryed everything, swith the PTD and CTD buttons on the board, put just 4 and 2 GB of ram (normally is 6GB). And when I connect a external monitor it just freezes on the boot logo of "samsung". Well, thanks for your help. I`m using an Asus GTX 750ti with a 500w PSU