-
Posts
20 -
Joined
-
Days Won
2
Content Type
Profiles
Forums
Downloads
Posts posted by twin snakes
-
-
@J95 Do you have an inf file of the latest driver for 980m on win10?
/or can I use the one from 352.84?
-
-
I'm on win10 with 352.86, working great, but how can I update newer game profile (like MGS V) into older driver?
-
yes i notice that too, 2nd gpu has higher vcore as well as lower asic quality
so do you get what you need?
- 1
-
there ya go, hopefully l'm doing it right
first i run about 10 sec of 3dmark11 (entry profile), take screenshot of 2 gpu-z status
then i ran render test in fullscreen mode, exit render mode and take asic quality of 2 gpus
final step is run render test in windowed mode and take asic quality at the same time (same with previous post)
pls note that left panel is GPU0 and right one is GPU1
/if there's anything i can help with, pls inform me
- 1
-
-
@J95 yes there's no way to fully loaded two GPU at same time, with SLI disabled, the 2nd gpu still sit idle, i even think to swap 2 gpus, but seem to be useless since 2 gpus behave exactly same way, 2nd gpu still idle anyway
Here my result, stock cpu& gpu clock, stock vbios, stock bios, driver 353.06, with VDDC set to highest value
GPU0
GPU1
- 1
-
-
here's mine, there's 2 problems:
- i cant "render test" both gpus (SLI), whenever windowed test or fullscreen test, only primary gpu is working, the other one is having rest time
- my machine misidentified primary GPU for GPU#1 and secondary for #0, not a big problem but i wonder wth happened, well since 680m-ism time long ago
VDDC is 1.05v during render test (main GPU), ASIC quality is 71.3% and 66.5%
-
Well i'm on holiday too, will help you on this sunday if you still need it
- 1
-
thank you
btw your 353.38 throttle like hell when benchmarking with 3dmark, but in games (GTA V, Witcher 3) still ok, no throtling
stock bios, stock vbios, stock GPU & CPU clock,
-
i installed exactly from that link you give, after clean windows installation
btw i will try 353.38 later, thanks for responding
/damn shame, i made a mistake, sorry pal
//have tried 353.38 PEG mod, still no luck, but i think there's sth wrong with my setup
///Well it seems that MFAA didn't support SLI, cos when i disable SLI, MFAA show up
- 1
-
-
donated, great work
/damn paypal dont accept my credit card, i'll find another way, sorry
- 1
-
can 7970m goes undervolt lower than 0.95v?
-
I'm new to these forums and I was just wondering would Alienware M17 M18 VGA Upgrade Kit Dell HD7970M | eBay work in my M15x? I'm still using the GTX 260m and it needs to be gone.
yes that kit will work, but be sure to check the backplate's screw holes, sine the default backplate from m17x/m18x is way to high for the m15x's heatsink screws, therefore the gpu's die cannot make contact with the heatisnk
-
i guess it should work with fan control automatically, since my m15x works great with clevo 6970m
-
First of all... don't use furmark if you want to have an functional GPU.
Then... your temps are quite high for this card, you shouldn't get past 85°C, really. I hardly hit 80°C in long gaming sessions. You're sure the heatsink fits well? Enough pressure? Is your system flat on the table or do you lift it a bit below the battery? Cause that helps a lot...
thanks for quick reply
as i said, not only furmark cause high temp, but in heavy task games like sleeping dogs or MoH warfighter the system still shutdown midgame
i tried repaste using Coolaboratory's Liquid Ultra and Laird's thermal pad on Memory module and VRM... but still no use, idle around 45-50, load increase slowly to 85-86* then shutdown immediately!
I have even tried lift the battery side much higher.
any suggest? i'm really frustrated now
-
sorry for bumping this thread up, but here's my problem
i have installed 7970m on my m15x system following svl7's guide, including backplate grinding and heatpipe modding. So far everything went ok, 3dmark score ok, game playing ok.
But when i play some heavy game like sleeping dogs, medal of honor 2012 and stress test using furmark, the system automatic shutdown when gpu's temp goes beyond 87 degrees!
have tried undervolt to 0.95 but nothing change, still shutdown when temp reach 86-87 degrees!
please help me!
[Alienware - Clevo - MSI] Aftermarket Upgrades Driver Support - Modded INF
in nVidia
Posted · Edited by twin snakes
OMG the Hibernate trick did work! Never know about this, you save my life!
got over 19k graphic score with newer driver! never been so happy!