Hi, This post is regarding EGPU issues, using pe4c 3.0. I am not sure if I should post this here. Everytime, I am able to boot without using setup 1.x, windows will show the error video_tdr_error with BSOD. When I checked with GPU-Z countless times, it showed pcie 3.0 x 16 @ x1 1.1. Had to rely on esetup 1.3 to retain my link although it is already x 1.2 in esetup. Thereafter, I am able to use the egpu without any flaws. When I checked with GPU-Z this time, it showed pcie 2.0 x 16 @ x1 1.1. I have tried the following, but to no avail: - Reinstall windows - Reinstall windows on another sdd - used Driver uninstaller - Hot plugging - the 2 switched for delay on pe4c 3.0 and 2.0 - used pe4c 2.0 Can someone help me? I want to use the laptop without using esetup, cos I would want to do hibernation/sleep. My system specs with mods are as follows: (Bought from igpu model with EC from ebay @ USD 420) E6440 igpu model (Bios A12) 16 GB hyperx i7-4700mq (Stock - Dont know how to do the TDP using trottlestop or bios or XTU) 250GB Msata Samsung EVO SSD, 500GB Sata 3 Samsung EVO SSD and 1 TB Toshiba 7200 rpm HDD GTX 760 ASUS Platinum Striker 450W Silverstone SFX power supply Previous with 2Gbps-EC eGPU: Fujitsu SH560 (PE4C 2.0 - eSetup 1.x) i5-540m