rashoumond

You have a very good GF106 core. 850MHz on .93V is great. I have a system with a smaller GF108 core and it can only do 845Mhz on .98V.

Hi Khenglish! Thanks for your reply and attention, i want to ask you something.

I have checked the temperature in game with MSI Afterburner and HWInfo64, it's on screen display, i got 70-75' Celcius for 2-3 Hours, my question,

1. How much temperature in celcius that safe for GPU in Full Load gaming? Is it safe if i use this overclock setting for daily use in game?

2. if i use the setting for daily gaming, will it damage the card? I Use Big Fan and Arctic MX 4 Thermal Paste for my laptop, and i use on screen display temp in game, so i can control the temperature.

3. If i can control the temp and make it cool as cool as possible, will it damage the card? Maybe short circuit electricity because the clock is not in the default ratio.

4. Core Clock, Memory Clock, and Shader Clock, are they have a definitely rule for the ratio between them? It's just Like, if Core Clock is A then the Memory Clock must B, and Shader Clock Must C, etc. And if i do not follow that rule, even the temperature is cool, it will damage my card. Is it like that?

Thanks, sorry if i have a lot of question, i'm a noub in overclock thing.

My Maximum Overclock on My GT555M, after this, BSOD.

Hello, i am a noub in overclock thing, i have Alienware M14X R1 With i7-2670QM, 2x4GB Corsair Vengeance 1600Mhz, and Nvidia GT555M 3GB Dedicated, after i flash the bios with A08 Mod and Sata Fix, with the default state bios A08 Mod, i look at GPUZ, My Graphic Card Show 0.93V on The Voltage, if it is like this, can i start the overclock without change anything again in the bios? Like Voltage or anything? How Maximum the GPU clock, Memory Clock, and Shader Clock can be raised before i must raise the voltage again from 0.93 V?

Is it safe if I start to overclock my Graphics Card without raise the voltage again to 0.95V or 1.0V?

Can i Start Overclock Now with my 0.93 Volt setting? Can i Start Overclock Now with default BIOS setting without changing anything (A08 Mod)?

Thanks for your help, i really appreciate. Sorry for my english. Thx!

I've just installed a 840 Pro in my m14x R1 works great and has no issue's so far, Runs at sata 2 speeds but i'm yet to try the bios fix, hoping i can get it up to full speed with that. I've got my ssd in the primary bay and a hdd in place of the dvd drive was a simple process. alienware laptops are great to work with in my opinion.

i used Samsung 840 Pro too and runs at sata 2 speeds, do you know how to make it run on sata 3? there are BIOS FIX in the forum, but i can't download it.

it's just like Alienware Graphics Amplifier, but i want to ask something, what type of slot and cable that bizon plugged in MBP? Is there possible to use Bizon in an ordinary laptop? Thanks.

I have 8770w !!! nice to meet you

Great! Quadro K4000M! Nice to meet you too

thank you

You're Welcome

Update your BIOS with the modded one, this is the link, http://forum.techinferno.com/alienware-m14x-aw-14/1786-m14x-r1-bios-a08-sata-fix.html

Hope it helps!

Hey Guys, i am a new user of Alienware, please guide me

Is it safe to overclock Alienware Notebook? How you can overcome the heat? Thermal paste, Fan or Something? Can you Give me a picture.

Hello Guys, Nice to meet you, i am purnomo aka rashoumond, i am noub, please guide me

- - - Updated - - -

Oh yes i'm forget, my gear is Alienware M14X. Is there anyone who used alienware too? Teach me what i don't know

Don't remove your battery when you plugged in your laptop, because the battery is the one who have stabilizer function for your motherboard. Keep battery plugged in, it will make the battery have a long life, don't be scared your battery broken, because battery will be broken when you always used it mobile, every battery have a cycle count.

I think my laptop didn't have G-Sync