Tried it, and device manager detected the standard vga adapter, install driver, and it detected a gtx660ti with an exclamation mark, code 12 and requires a restart. Strangely after restart, my laptop took 15-20seconds to boot, but thats not big a problem since it managed to boot into diy egpu setup 1.30 and finally the setup recognize egpu. I performed a pci compaction 32bit, works fine, pcie write says yes, ignored and disable dgpu via setup 1.30, until I reboot again with egpu plugged on wifi port. Second reboot, my laptop wont able to enter bios, boot into win 7 or egpu setup. Just a blank black screen, i wait for over 10minutes still nothing happen so i decide to re-plug the pm100c cable from wifi port and black screens gone, laptop enters boot menu. From that point i boot into setup1.30 and again, it cant detect any device on wifi port. I guess there is something wrong with pm100c cable, i start thinking to buy a new pm100c cable or should I buy a new adapter instead? I think write2dgray and I have a same problem. I wish I could explain this in better words, sorry for my bad grammar nando.