gharimanto
-
Posts
74 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by gharimanto
-
-
I change switch my PE4C 3.0
SW 1 = 2
SW 2 = 1
For different purpose
And this happen
SpoilerWhen I check nvdmi.inf
could I enable optimus ?
-
Hi AgMR
what's your system ? Did you use Setup 1.30 ?
With optimus profile, I cannot activate DSR and some nvidia features
-
3 hours ago, autospamfighter said:
Are there any cases or enclosures for the PE4C v3,0?
Still yet
-------------------------
About 3 weeks I use gtx 1060, but...
I got Nvidia driver not responding every I am playing games, This was 2 days ago until today
Btw 2 weeks ago I go for clean install windows 10 and still not receive any update annivesary 1607.
I use 368.81 and 368.95 driver version (use DDU for unintalling driver)
but still yet fix the problem
Should I clean install win 10 again ?
-
-
-
awesome dude
beside Razer,
Gigabyte and Powercolor has TB3 enclosure
But it don't released yet
-
Same as me.
Waiting for internal display
Which work with rx 480 with xconnect feature
-
Hi guys.
I'm just wondering
How to check 12V of dell da-2 with multimeter ?
Is same as PSU atx ?
I have been tried.
This psu haven't power on (green pin) like psu atx.
So I dont need power on the dell psu.
Instead I plug yellow pin (12 V) with red cable and black cable from multimeter into ground pin according the images.
And the result show 0V instead of 12 V
??????
What's wrong with me ?
Update:
I got it guys. Try plug remote and ground pin
Thank you.
-
7 hours ago, yeahman45 said:
but why are so many users in this thread reporting crashes with PE4C 3.0 ?? Really want to order the PE4C 3.0 to replace my EXP GDC V8 (which crashes now and then with gen2) but PE4C 3.0 is 2 to 3 times more expensive thant the EXP GDC v8 and I don't want to spend so much money for something which will not be stable on gen2..
So are users reporting crashes with PE4C v3 just stupid users who don't know how to connect the GPU or are there really issues with PE4C v3 on gen2??
Me either who use pe4c v.3
And I am still suffering unstable gen 2.
About RMA, that will be costly in my country.
7 hours ago, 3RYL said:I don't know what's happening to others. But I had performance issues on gen2 with my first PE4C 3.0, so I made an RMA and replaced it with a working one. Probably some manufacturing issue with the cable or soldering...
7 hours ago, 3RYL said:Yes. I had to return it for them to test it. Strangely it worked on Gen1 and did not crash at Gen2, just had terrible performance.
You're lucky, man.
Btw, I Switch gen 1 And my PE4C v.3 still got crash.
But I'm okay with it
(because of desperation)
-
4 hours ago, Psyrecx said:
Now all I need is the 6pin cables that EXP GDC did not include for some reason or another.
You may consider to use PSU ATX instead of dell 220W
Glad to listen who use Polaris GPU
I'm waiting for AMD XConnect feature
What the feature is work or not
-
On 6/12/2016 at 1:54 AM, gharimanto said:
I've got little problem with my system after booting.
It was six months ago, but I'm lazy to fix that. But I cannot tear up my laptop forever.
My system specification is described in below (signature)
First, I plug expresscard (ec) into laptop and booting. It was running normally. eGPU detected and it's nothing problem. I can run any games smoothly and benchmark any programs.
But after I shutdown the system and unplug the ec and booting again, I saw bluescreen on the screen that describe whea_uncorrectable error.
So, I must force shutdown with keeping press the power button until system was off.
And this accident got my system, again and again.
What's the solution ?
Hopefully, I can found it on this thread.
3 weeks and I cannot resolve this problems
anyone ?
-
On 6/27/2016 at 11:45 AM, killem2 said:
So i have installed a clean version of Windows 10, UEFI. My device manager shows this:
I do not have Setup 1.x installed just yet. When I run something like Heaven Benchmark I'm getting like 7 FPS on ultra.
This is also using an kitio thudnerbolt 2 setup.
When I successfully ran this under 8.1 windows it was easily 50 fps. maybe more. I thought the drivers for Nvidia Fixed this kind of stuff. What should I do? Any info you want me to show you?
Did you update latest intel HD ?
It let me hot plugged now.
-
Finally
my PE4C 3.0 can suit CM elite 130 case
Build eGPU PE4C 3.0
-
You may try to downgrade pcie gen 2.0 to pcie gen 1.0 via setup 1.30 or your bios
-
2 hours ago, warl0ck said:
Hi guys first of all thank you for all information displayed in the forum's.
My question is;
Depending on the graphic that I'll be using the Dell 220p AC will be sufficient, but is it better to get an ATX power supply instead?
Does it comes included with the Pe4c v3?
If not can I buy it separately? Don't see it in the website.
Cheers guys
I recommend to buy new atx psu.
Dell da2 220w was discontinued.
If you found one, that will be refurbished.
- 1
-
1 hour ago, angelo1987 said:
do you know this adaptor? could it usefull for my case?
[video]
I don't
-
1 hour ago, angelo1987 said:1 hour ago, angelo1987 said:
my clevo p751dm has a mxm 3.0b port, and also a tb3 (USB 3.1 Gen2 / ThunderboltTM 3 combo port ( Type-C) )
what is the best egpu in tb3 o egpu on mxm?
my clevo p751dm has a mxm 3.0b port, and also a tb3 (USB 3.1 Gen2 / ThunderboltTM 3 combo port ( Type-C) )
what is the best egpu in tb3 o egpu on mxm?
Wait for gigabyte or powercolor TB3 enclosure. I think this enclosures more cheap than razer core.
power color :
Gigabyte has two option :
- 2
-
Gigabyte has two option of enclosure
And this one of them
-
eGPU
I've got little problem with my system after booting.
It was six months ago, but I'm lazy to fix that. But I cannot tear up my laptop forever.
My system specification is described in below (signature)
First, I plug expresscard (ec) into laptop and booting. It was running normally. eGPU detected and it's nothing problem. I can run any games smoothly and benchmark any programs.
But after I shutdown the system and unplug the ec and booting again, I saw bluescreen on the screen that describe whea_uncorrectable error.
So, I must force shutdown with keeping press the power button until system was off.
And this accident got my system, again and again.
What's the solution ?
Hopefully, I can found it on this thread.
- 1
-
1 hour ago, tony_2018 said:
Hi,
New to the forum and to eGPU. I was going to order the P4EC v3.0 but realize I could not use both an mpcie and the express card because the cables are not interchangeable, they are soldered onto the boards. I wanted to do my own testing to see which would be the prefered method for me because I have both options. Can someone tell me what the pro's/cons of both adapters? It would save me some $$$ from purchasing 2 whole units.
If you ignored the performance of pcie gen 1, maybe you are considering to buy PE4C 2.0
-
20 hours ago, tusctodd said:
Could I use the method with express card setup ?
[update]
that works too on me
Awesome!
thanks dude !
-
More razer core reviews
Until now, only razer laptop work properly.
On videos, he's already testing on other laptops like alienware, acer, dell, that they have TB3 port.
- 1
-
Power Color just released The TB3 Enclosure too with Razer Laptop
http://www.jagatreview.com/2016/05/computex-2016-powercolor-pamerkan-modul-vga-eksternal-devil-box/
-
1 hour ago, Dschijn said:
thank you very much
I decided to buy Li-heat riser, hopefully it doesn't decrease egpu performance
BPlus PE4C V3/V2 discussion
in Enclosures and Adapters
Posted
I do some research, if My PE4C 3.0 was broken or not
I switch my PSU
from Dell DA-2 to Seasonic bronze 520W
And still yet.
I assume My PE4C 3.0 was defect
should I do another test ?