Athlonia

Hey! I see you managed to oc ram. Does your system freeze or lockup when you try to oc the ram by MSIfterburner or Trixx? (on default bios, because as i see, you flashed the bios already)

I have a 8970m and whenever I move the slider with MSIAfterburner or Trixx over 1250Mhz on the ram, my lap freezes and resets.

Hello. I can with all programs overclock my RAM, even before the flash.

Have a Clevo card in my Alienware.

I have installed a 8970M from a Clevo barebone P170SM (VBIOS BR44465.003).

I flashed the VBIOS blind, with the version BR44618.001 (Non-Enduro VBIOS).

Have you ever tested the VBIOS BR44450.007? Both have the same Rom Message. See post#19

But have no idea whether works.

Can all overdrive values ​​to change without freezes. Only the voltage is then reset with me.

Use a different VBIOS (BR44618.001). You used BR44465.003 that are with me a black screen.

I flashed the VBIOS blind, with the version BR44618.001.

Have you ever tested the VBIOS BR44450.007? Both have the same Rom Message.

Edit 1: http://forum.techinferno.com/clevo/4573-can-someone-supply-8970m-clevo-vbios.html

I have installed in my Alienware a 8970M.

I have my 8970M VBIOS changed with VBE7.

My changes:

Memory Clock: 1250 MHz to 1350 MHz from

TDP (W): from 81W to 94W

TDP limit: from 0% to 15%

Undervolt 850 MHz: from 1.025V to 1.000V

Undervolt 900 MHz: from 1.050V to 1.025V

Problem: During activation of AMD Overdrive disabled Undervolt to 1.050V (Default value before VBIOS mod).

GPU-Z and HWInfo I used to read the values​​.

Is that with you too?

I have my 8970M VBIOS changed with VBE7.

Undervoltage - works

Core and Memory Clock - works

PowerTune TDP Limit - works

Change of TDP - works

OCCT - no throttling

My changes:

Memory Clock: from 1250 MHz to 1350 MHz

TDP (W): from 81W to 94W

TDP limit: from 0% to 15%

Undervolt 850 MHz: from 1.025V to 1.000V

Undervolt 900 MHz: from 1.050V to 1.025V

Edit 1: OCCT - no throttling: only by increasing TDP (W) = 94W

Hello. 16GB (8GB modules) RAM only work temporarily in R2.

At some point, passed a memory channel on the CPU.

That's what happened to me two times.

I have installed a 8970M from a Clevo barebone P170SM (VBIOS BR44465.003).

Computer booted unfortunately without an LCD issue.

I flashed the VBIOS blind, with the version BR44618.001 (Non-Enduro VBIOS).

After a reboot, I have finally an output on the LCD screen.

I am on A10 Unlocked bios and fans are working auto.

I've done Prolimatech PK-3 Nano Aluminium thermal paste on the GPU cores, GPU memory chips and the inductors, Phobya Thermal pad Ultra 5W/mk on the MOSFETs.

Idle temperatures are 34° (GPU sensor), 32° (Dell sensor) at 1400 RPM (HWInfo64). Without HWInfo64 the fans go out at these temperatures and start at 55° again.

Alienware stands on a notebook cooler without a fan.

Works VBE7 on the 8970M?

if so, what settings work?

De vbios i run my 8970m from is modded with VBE7 now so i can indeed confirm that it works

What is the attitude they have made with VBE7?

Is it possible to change everything, even the voltage?

De vbios i run my 8970m from is modded with VBE7 now so i can indeed confirm that it works

What is the attitude they have made with VBE7?

Is it possible to change everything, even the voltage?