-
Posts
170 -
Joined
-
Last visited
-
Days Won
5
Content Type
Profiles
Forums
Downloads
Posts posted by runix18
-
-
17" VS 15" Pro's and Cons'
17"
PRO:
-better cooling
-bigger display
-full keyboard
CON'S:
-heavyer
-more expensive
15"
PRO:
-lighter
-more compact
-in most cases thiner
-less expensive
CON'S:
-not so good cooling solution
-no full keyboard (in most cases)
-more compact (could be a con aswell if it houses high performance parts)
- 1
-
7 hours ago, Binarious said:
I got the NVIDIA driver to install, but it only installs the HD Audio portion and not the graphics card part of it. I need this for work and I'm about to put the 980m back in at this point.
I'm running Windows 10
I have not yet received help from this.
If anyone else knows what I can do to resolve this I will appreciate it greatly. I wasn't expecting these problems and need to get it ready for work asap.
u got PM
-
search them on google with they'r hardware ID, it will show up right away what they are.
If not you can always try drp.su for automatic driver install, it fast accurate and free.
-
leave here the complete hardware id of your card from the device manager here, and I will make a moded inf for you.
-
Hi Baked, any chance for the moded 2.0 version of p870dm/dm-g? (you know, overclock menus, clean menus, and maybe any chance of the updated i7 7700k microcode ?)
Thx.
-
On 16.10.2017 at 10:48 PM, burningcalifornia said:
http://www.eurocom.com/ec/upgrade(2,267,0)Alienware_M18xR1
These folks suggest a GTX 880M will work. Thats a pretty capable card.
I was refering tot the physical shape of the card, not the chip obviously.
-
-
If Gtx 880M will work, for more than sure Gtx 980M wil also work, coz basicaly its the same card physicaly but also 980m at stock speeds runs cooler than 880m.
-
Hi Andresh, I remeber when I had my Mx 14 R4 ( btw the same dead 675 ) and I upgrade it to a gtx 780m.
And now to answer ur questions:
1. Unlocked bios not necesary but recomended ( to be able to switch to SG Mode to enable optimus properly), you will need moded drivers to be able to install the drivers and use the card properly.
2. Ebay is a great place to buy, a large range of prices and options, just be careful from who you buy ( needs to be a reputable seller with a lot of sales and transactions, and a very good feedback)
3. When u change the card be sure to have a good thermal paste at hand or go to specialized service if u dont want to do it, otherwise its a plug and play fit.
-
18 hours ago, Klem said:
Yes of course.
Already did that, like I always do when I update bios, the error is still there.
-
Thx Klem, but I tried to flash and it gave me an error: 18 secure flash check fail, after reading the flash.
Did I do something wrong? Setting in bios maybe (uefi off / secure boot off / CSM on)
Flashed the usb drive with Rufus on MBR (Bios and Uefi support)
-
Baked, when do you think we will have a 2.0 version for the p870dm bios? I realy need those cpu overclock menus. PLS
- 2
-
On 7/15/2017 at 4:31 PM, thegh0sts said:
how does the P870DM-G BIOS compare to Prema's BIOS mod?
Because it's blocked off on a hardware level.
I know, I posted the question in another post, but had to try anyway, my finger was itching:))))
-
Baked, do you have any idea how can I undervolt the cpu, keep clock on 4.2 ghz on all cores on your bios? I couldn't find the settings (or i'm blind or stupid), and also overclock the ram at 2400 MHZ ( but that's not realy that important)
And Btw, for any of you who's having Clevo P870DM-G DO NOT ENABLE IGFX in bios, it will only result in a black screen (tried it and had to do a NVRAM reset)
Another thing from my findings it is advisable to flash custom VBios for your cards before flashing unlocked bios coz it sometimes might result in a black screen.
This only aplies for Clevo P870DM-G, I have not tested IGFX function on another laptop.
- 1
-
Here u are:
Realtek ALC892 @ Intel Sunrise Point PCH - High Definition Audio Controller
-
From a 680 to 980 it's preety much a PnP job, just make sure to have extra pads to mach the thickness required, and the sink to make a perfect contact with all the parts properly.
-
2 minutes ago, LoganWPatch said:
I don't think you need the modified drivers for Windows 10 that's how my laptop originally was sent I got it used but I needed Windows 7 for my 3D printing scanning and art programs
Sent from my XT1650 using Tapatalk
Maybe u were the lucky one that have had a laptop with an upgarded GPU (Dell obviously) with an exact stock hardware ID that maches stock nvidia drivers, it usualy isn't the case.
-
21 minutes ago, LoganWPatch said:
I have a single 980m. Your heat sink brackets and everything should work including your SLI cable. Are you going to be running Windows 7 or Windows 10. To run Windows 7 you will need the unlocked a 11 bios and modified NVIDIA drivers.
Sent from my XT1650 using Tapatalk
You will need modded drivers from then on indiferent of the OS
-
The only thing you can actualy do is a CMOS reset. You will have to remove the AC, battery and cmos batery, push power button few times to completly drain residual energy from caps, leave for 30 sec or so, plug in only AC, turn on, if it starts turn off, replug cmos battery, replug baterry, enter bios and remake all your settings and if it does not work try also to re seat the ram sticks and/or leave only just ram stick in different slots and if that does not solve it, it means u have another bigger problem.
-
If gaming is what u have in mind 7700k is WAY MORE than enough.
-
Either way you go (clevo or alienware) try not to get the BGA CRAP.
Ps: Alienware for a long time it's not a desktop replacement anymore, not since the mx18 r2 died, everything with alienware today is BGA CRAP, you could never see a bga crap as a desktop replacement, NEVER.
-
On 25.06.2017 at 0:40 AM, jamesrh305n said:
I have P870dmg, how much you can push your gpu using this overclocked bios? Thanks.
Not too far if you don't have a moded vbios(you will need that first in order to be able to push power limiter and voltages further otherwise you will just get a blue screen)
And for the actual overclock I recomend Nvidia inspector because the options from the bios are a little bit vague (do it at your own risk and first google each option that you want to play with to be 100% sure you know what you are doing)
-
12 hours ago, jamesrh305n said:
I am just curious what can you do with this unlocked bios? because I also want to flash this bios. Thanks.
To keep the story short:
Unlocked fast boot menu: on/off
Unlocked ram overclock menus
Unlocked Chipset menu( one can control everything tied to the chipset : HDAudio, Lan Card, Wifi Card, Bluetooth, Camera and much more)
Unlocked Sata operation (AHCI OR RAID)
Unlocked GPU settings, power trothle, power limit, PCI express Gen select (1, 2, 3), ability to power down pci express lanes when they are not in use.
And much more...
Things I hope to come in the future: CPU Overclock, power limit ajust and throtle stop ability (at least for the ones with a K CPU)
I will also ask Baked to corect me if anything is wrong in my post.
-
23 hours ago, jamesrh305n said:
In this modded bios? can the integrated gpu can be activated in p870dm-g?
No it cannot, IGPU is diconected at a harware level.
- 1
Need help with 2 stubborn drivers
in Alienware M14x / AW 14
Posted
The second one points out to Compal embedded system control of some sort
See if you can find something like that in your drivers list from dell support.