sergeikaspd

Today I bought a pa-3e dell 90w slim adapter - nothing chached. At startup BIOS says

The AC power adapter wattage and type cannot be determined.

The battery may not charge.

The system will adjust the performance to match the power available.

Please connect a Dell 90W AC adapter or greater for best system performance

..wtf?

CPU still 797...

Carrrramba!!

I'm realy need battery! Or 90W AC! Dumb "Power technologies".....

I boot up from my liveDVD Linux, and run cpuburn.

htop says, that CPU% is 100 to all cores

i7z(ino-utility for i3-7 processors) show

Cpu speed from cpuinfo 1495.00Mhz

cpuinfo might be wrong if cpufreq is enabled. To guess correctly try estimating

Linux's inbuilt cpu_khz code emulated now

True Frequency (without accounting Turbo) 1495 MHz

CPU Multiplier 15x || Bus clock frequency (BCLK) 99.67 MHz

Socket [0] - [physical cores=2, logical cores=4, max online cores ever=2]

TURBO ENABLED on 2 Cores, Hyper Threading ON

Max Frequency without considering Turbo 1594.67 MHz (99.67 x [16])

Max TURBO Multiplier (if Enabled) with 1/2/3/4 Cores is 26x/23x/23x/23x

Real Current Frequency 797.30 MHz [99.67 x 8.00] (Max of below)

Core [core-id] :Actual Freq (Mult.) C0% Halt(C1)% C3 % C6 %

Core 1 [0]: 797.30 (8.00x) 65.8 64.9 0 0

Core 2 [2]: 797.24 (8.00x) 65.9 64.9 0 0

C0 = Processor running without halting

C1 = Processor running with halts (States >C0 are power saver)

C3 = Cores running with PLL turned off and core cache turned off

C6 = Everything in C3 + core state saved to last level cache

Above values in table are in percentage over the last 1 sec

[core-id] refers to core-id number in /proc/cpuinfo

'Garbage Values' message printed when garbage values are read

Ctrl+C to exit

Cat /proc/cpuinfo show

processor : 0

vendor_id : GenuineIntel

cpu family : 6

model : 42

model name : Intel® Core i7-2617M CPU @ 1.50GHz

stepping : 7

microcode : 0x1a

cpu MHz : 800.000

cache size : 4096 KB

physical id : 0

siblings : 4

core id : 0

cpu cores : 2

apicid : 0

initial apicid : 0

fpu : yes

fpu_exception : yes

cpuid level : 13

wp : yes

flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid

bogomips : 2989.25

clflush size : 64

cache_alignment : 64

address sizes : 36 bits physical, 48 bits virtual

power management:

processor : 1

vendor_id : GenuineIntel

cpu family : 6

model : 42

model name : Intel® Core i7-2617M CPU @ 1.50GHz

stepping : 7

microcode : 0x1a

cpu MHz : 800.000

cache size : 4096 KB

physical id : 0

siblings : 4

core id : 0

cpu cores : 2

apicid : 1

initial apicid : 1

fpu : yes

fpu_exception : yes

cpuid level : 13

wp : yes

flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid

bogomips : 2989.25

clflush size : 64

cache_alignment : 64

address sizes : 36 bits physical, 48 bits virtual

power management:

processor : 2

vendor_id : GenuineIntel

cpu family : 6

model : 42

model name : Intel® Core i7-2617M CPU @ 1.50GHz

stepping : 7

microcode : 0x1a

cpu MHz : 800.000

cache size : 4096 KB

physical id : 0

siblings : 4

core id : 1

cpu cores : 2

apicid : 2

initial apicid : 2

fpu : yes

fpu_exception : yes

cpuid level : 13

wp : yes

flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid

bogomips : 2989.25

clflush size : 64

cache_alignment : 64

address sizes : 36 bits physical, 48 bits virtual

power management:

processor : 3

vendor_id : GenuineIntel

cpu family : 6

model : 42

model name : Intel® Core i7-2617M CPU @ 1.50GHz

stepping : 7

microcode : 0x1a

cpu MHz : 800.000

cache size : 4096 KB

physical id : 0

siblings : 4

core id : 1

cpu cores : 2

apicid : 3

initial apicid : 3

fpu : yes

fpu_exception : yes

cpuid level : 13

wp : yes

flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid

bogomips : 2989.25

clflush size : 64

cache_alignment : 64

address sizes : 36 bits physical, 48 bits virtual

power management:

As you can see, on another OS same ....khm..

I drop BIOS settings to "optimal defaults" - nothin changed.

Maybe 60W AC is weak point?

HWiNFO

Clock Ratio Bus VID

CPU Status - - 99.7 MHz 0.83(~4)06 v

CPU Stepping: J1

CPU Power Limits (Max): Power = Unlimited, Time = Unlimited

CPU Power Limit 1 (Long Duration): Power = 17.00 W, Time = 28.00 sec [Locked]

CPU LFM (Minimum): 800.0 MHz = 8 x 100.0 MHz

CPU HFM (Maximum): 1500.0 MHz = 15 x 100.0 MHz

CPU Turbo: 2600.0 MHz = 26 x 100.0 MHz [Locked]

CPU Current: 797.3 MHz = 8 x 99.7 MHz @ 0.8306 V

Did it ever reached its rated speed with the current or with another os?

Yes, on HDD I remember, that system show to me dynamic speed 0.5-1.5Ghz ... but I'm not shure

service tool that will configure the pc to run at the right speed

What is the Service tool?

Yes, I did make all of this things. Throttlestop does nothing to change. Show

Intel Core i7-2617M 8x99.68Mhz=797.4Mhz

and 797 does not change at all. HWINFO show the same thing. Testing on WathDogs (By the way, sound's freezing sometimes, and in WatchDogs sound go apart from video and...just stucking)

Maybe, my A04 bios is the fault... But I can't update BIOS to a05-unlocked while I have no battery..T_T

Sorry for my english

Download link is dead

Also i clean cpu fan. no change, all work's pretty slow =((

In my thinkpad x200 wwan modem gobi get's very hot all time when notebook is on, and not matter, do i use it or not. It's normal?

I'm install windows 8.1 today on SSD. All driver's too. But windows show only 0.51ghz-0.66 ghz max at all=( What i should do to get full power of i7? In BIOS "turbo" is on. In windows: power plan is perfomance.

unable to play games, and other stuff working slow.

Sorry for my english

On ebay for ~500-600$

And my m11x r3 have a died battery....any ideas how to get it alive?