sergeikaspd

Today I bought a pa-3e dell 90w slim adapter - nothing chached. At startup BIOS says ..wtf?CPU still 797...

Carrrramba!! I'm realy need battery! Or 90W AC! Dumb "Power technologies".....

I boot up from my liveDVD Linux, and run cpuburn. htop says, that CPU% is 100 to all cores i7z(ino-utility for i3-7 processors) show Cpu speed from cpuinfo 1495.00Mhz cpuinfo might be wrong if cpufreq is enabled. To guess correctly try estimating Linux's inbuilt cpu_khz code emulated now True Frequency (without accounting Turbo) 1495 MHz CPU Multiplier 15x || Bus clock frequency (BCLK) 99.67 MHz Socket [0] - [physical cores=2, logical cores=4, max online cores ever=2] TURBO ENABLED on 2 Cores, Hyper Threading ON Max Frequency without considering Turbo 1594.67 MHz (99.67 x [16]) Max TURBO Multiplier (if Enabled) with 1/2/3/4 Cores is 26x/23x/23x/23x Real Current Frequency 797.30 MHz [99.67 x 8.00] (Max of below) Core [core-id] :Actual Freq (Mult.) C0% Halt(C1)% C3 % C6 % Core 1 [0]: 797.30 (8.00x) 65.8 64.9 0 0 Core 2 [2]: 797.24 (8.00x) 65.9 64.9 0 0 C0 = Processor running without halting C1 = Processor running with halts (States >C0 are power saver) C3 = Cores running with PLL turned off and core cache turned off C6 = Everything in C3 + core state saved to last level cache Above values in table are in percentage over the last 1 sec [core-id] refers to core-id number in /proc/cpuinfo 'Garbage Values' message printed when garbage values are read Ctrl+C to exit Cat /proc/cpuinfo show processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 42 model name : Intel® Core i7-2617M CPU @ 1.50GHz stepping : 7 microcode : 0x1a cpu MHz : 800.000 cache size : 4096 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid bogomips : 2989.25 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 42 model name : Intel® Core i7-2617M CPU @ 1.50GHz stepping : 7 microcode : 0x1a cpu MHz : 800.000 cache size : 4096 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 apicid : 1 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid bogomips : 2989.25 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 2 vendor_id : GenuineIntel cpu family : 6 model : 42 model name : Intel® Core i7-2617M CPU @ 1.50GHz stepping : 7 microcode : 0x1a cpu MHz : 800.000 cache size : 4096 KB physical id : 0 siblings : 4 core id : 1 cpu cores : 2 apicid : 2 initial apicid : 2 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid bogomips : 2989.25 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 3 vendor_id : GenuineIntel cpu family : 6 model : 42 model name : Intel® Core i7-2617M CPU @ 1.50GHz stepping : 7 microcode : 0x1a cpu MHz : 800.000 cache size : 4096 KB physical id : 0 siblings : 4 core id : 1 cpu cores : 2 apicid : 3 initial apicid : 3 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid bogomips : 2989.25 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: As you can see, on another OS same ....khm.. I drop BIOS settings to "optimal defaults" - nothin changed. Maybe 60W AC is weak point?

Clock Ratio Bus VID CPU Status - - 99.7 MHz 0.83(~4)06 v CPU Stepping: J1 CPU Power Limits (Max): Power = Unlimited, Time = Unlimited CPU Power Limit 1 (Long Duration): Power = 17.00 W, Time = 28.00 sec [Locked] CPU LFM (Minimum): 800.0 MHz = 8 x 100.0 MHz CPU HFM (Maximum): 1500.0 MHz = 15 x 100.0 MHz CPU Turbo: 2600.0 MHz = 26 x 100.0 MHz [Locked] CPU Current: 797.3 MHz = 8 x 99.7 MHz @ 0.8306 V

Yes, on HDD I remember, that system show to me dynamic speed 0.5-1.5Ghz ... but I'm not shure What is the Service tool?

Yes, I did make all of this things. Throttlestop does nothing to change. Show and 797 does not change at all. HWINFO show the same thing. Testing on WathDogs (By the way, sound's freezing sometimes, and in WatchDogs sound go apart from video and...just stucking) Maybe, my A04 bios is the fault... But I can't update BIOS to a05-unlocked while I have no battery..T_T Sorry for my english

Download link is dead

Also i clean cpu fan. no change, all work's pretty slow =((

In my thinkpad x200 wwan modem gobi get's very hot all time when notebook is on, and not matter, do i use it or not. It's normal?

I'm install windows 8.1 today on SSD. All driver's too. But windows show only 0.51ghz-0.66 ghz max at all=( What i should do to get full power of i7? In BIOS "turbo" is on. In windows: power plan is perfomance. unable to play games, and other stuff working slow. Sorry for my english

On ebay for ~500-600$

And my m11x r3 have a died battery....any ideas how to get it alive?