Stormycham
-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by Stormycham
-
-
As for your temps, did you get your card from upgradeyourlaptop (eurocom)? Was it a kit? Temps for crysis 2 have <82C on my R2. How is your paste job?
After cutting the x-bracket a little my temps drop by +7°c ....
I bought my card directly from DELL , the x-bracket is an offical 7970M DELL to.
The upgradeyourlaptop kit uses a 6970M/6990M X-bracket.
I use IC diamond7 for the GPU and 0.5 mm pads (7W) from Phobia on memory chips and VRMs
-
Hello ,
I have bricked my card
I have used ATIWinflash under windows , the flash have failed and now the card is preventing the system to boot...
The CapsLock and ScrollLock are flashing on booting , preventing the bios to go further.
SVL7 said the only way is to desolder the bios chip and solder another one , i 'm awaiting him to do this for me , but is there another solution ?
I'm very disapointed , that's the first time i brick something and i've done numerous flashes before , and never had any problem...
Thanks in advance
-
RAZER Mamba
Currently 1200 DPI @ 1000Hz
Sometimes 1800 DPI @ 1000Hz for some games (mostly FPS games)
-
Well , if anyone have tried to flash DELL to a CLEVO 7970M , it would be great to know the result concerning the fan becomming native or not
-
Yes , i have a m17x-r2 , upgraded from Xfire 5870M to one 7970M
My 7970M comes from DELL and i receved it with DELL official X-plate.
I have no need of HDMI support and would prefer native fan control instead of lauching HWINFO64...
I have also planned to undervolt the card , i'm reaching 83°C while playing Crysis 2 ^^
The X-bracket have been modified , i've cutted the "branches" by 1millimeter in order to do a retention Mod , before this mod i was reaching +87°c
quickly and the laptop was cutting power due to overheating from the card....
Cheers
-
Hello everyone ,
well no need in repeating the title ^^
Does anyone tried this or is it definitely impossible ?
Thanks in advance
-
Hello , should be a nice idea to have this tuto on the site
I bricked my 7970m VBIOS NEED HELP! Alienware M17x r4
in Alienware M17x / AW 17
Posted
If my experience can help....
I have done the same mistake as you , bad flash with this %*$£°@ Winflash ...
On my M17x-r2 the 7970M when installed prevents the Computer to post (CapsLock and ScrollLock are flashing).
I have tried to install one 5870M in first pcie port and the 7970m in the "slave" port....same result , the 7970m prevents the computer to post , so no possibility to flash it anymore...
The only solution is to solder a new bios....may i suppose you to contact SVL7
Cheers !