ManOfKnight

The vBIOS allowed my computer to USE it by picking maximum performance...still can put PEG in the BIOS or I get 8 beeps...but now I have to upgrade to a 240w adapter. The 180w adapter has my processor at 1.2Ghz and my 8970m REALLY slowed, by over half. Can't wait to feel the TRUE power of this card when my adapter arrives the day after Christmas. Thanks for all the help, I would have NEVER figured all this out.

Not yet, I didn't have the vBIOS until now. San Pedro just emailed it to me. I am getting 5 beeps at this moment after clearing the CMOS. Have to read up on what that means.

i installed the 13.12 mobility but if i go PEG and shut off iGPU i get 6 to 8 beeps depending on if i shut off other items in bios (special features) - - - Updated - - - i did that - - - Updated - - - I have those options but i get AMD Catalyst Control Center cannot be started. There are currently no settings that can be configured using AMD Catalyst Control Center.

The HD8970 does not have dual sided memory.

OK. Turns out WINDOWS RECOGNIZES the card...but the system will not switch to it. Go PEG, disable internal...6 beeps. - - - Updated - - - GPU-z sees it...windows sees it...can't USE it - - - Updated - - - Tried that and special features (don't know what that does)...6 beeps...or 8 beeps...depending on what I turn off.

FINALLY GOT WINDOWS TO RECOGNIZE IT!!! Third driver loaded did the trick...beta driver from AMD.

downloaded modded drivers...still microsoft basic display adapter

Thx. Got the fan control running now. downloading modded drivers. I will post when completed.

I purchased it from an individual who stated it was a dell 4gb 8970 no i got no errors...so i thought at first it was working fine. - - - Updated - - - I am downloading a modded set of drivers...on a T-1...so going to workout then I will check it...have one hour

Which driver should i install? I tried AMD's from their website...to no avail. It shows up Microsoft something display adapter - - - Updated - - - Just installed HWINFO...HWINFO recognizes the 8970...hmmmmm

But with PEG i can't even get it to POST...I get 8 beep code.

Did that few minutes ago...disabled intel Gfx and enabled PEG...8 beeps, no LCD. Had to take the card out and reset the BIOS to get it to display LCD again. Still nothing.

The drivers are installed. The problem is it doesn't recognize the ATI GPU as anything more than a Microsoft Generic Display Adapter and the fan refuses to spin after 20 seconds into the boot cycle. I don't know if unlocked drivers will fix this issue or not or it requires a 240w power adapter to fully be recognized and start the GPU fan.

Last night I spent the better part of two hours pulling my hair out due to issues from upgrading from a 660 to a 8970m. First it appears my 180w power adapter may not be enough, which may or may not be causing my issues. I do NOT have an unlocked BIOS as I cannot download one without 5 posts...I am using the A13. Here is what I have seen: Bios sees the GPU...it states ATI GFX Windows 8 sees a Microsoft Generic Display Adapter but GPU-Z sees that Radeon produces it GPU fan spins on boot, tests fine in tests from the BIOS, but stops spinning 15 seconds into boot up My laptop is powered off as not to damage my new card. My questions are: Do I need the 240w power adapter to even power the card? I figured on battery power it should have worked doing Alt-F7 but even that didn't work. Will just a modded BIOS fix both the recognizing of the card and make the fan spin?

I asked a guy selling my 8970m on ebay (so take that for what it's worth)...he said the same hsf can be used but new pads will be needed.