locking86

First of all, thank you very much Aikei. Your guide is clear and easy to do and works like a charm.

Since i am new here i would like share my overclock file to make it easy to everyone that is not sure how to do.

My file is for NOTEBOOK P150EM - GPU 7970M - CRC 0xF400- Core: 970 / Mem : 1200 - link :

LINK

Interestingly its my iGPU that packs up first, tried adjusting its multi for a bit of fun (and possibly improved dGPU throughput? You know, cos its wired weird) and it froze up instantly, stable at 105.0616MHz reference clock (actual clock is around 104.8), no higher, i get a couple of seconds shaved off bench times so its all good, only worth about 1 frame more in games at best though xD. I also need to check the cooling job on my cpu because core temps have around a 10C discrepancy between core 1 and core 2/3. Also OC'e my RAM to 1961MHz! (With increase in cycle times however)

- - - Updated - - -

Mine is reported as a p15xEMx too. In my case it is a p150em and I think that's the case overall. CPU-Z should tell you as well under motherboard tab then model.

Thanks, my model is the p150em as Prema said.

My best regards

Sure, everyone can directly flash the Mods, only:

• P1x0EM: IF THE CURRENT SYSTEM BIOS / EC IS 1.00.03 OR EARLIER, IT IS MANDATORY TO UPDATE TO 1.00.04 BEFORE USING THIS MOD!
  

In your opinion is too risk downgrade my bios to 1.00.04?

I have a very little experience in moddin so i don't know how risk it could be.

I updated here :Clevo BIOS Thread

Thanks

Downgrade should work, but I haven't tried it. Working on the new 301 based Mod, it's not too far off:

http://goo.gl/Ixnhbq

That's a Clevo P370SM3, you will have to wait for the Mod...

P151EM has no backlight keyboard, while P150EM has.

Thank you very much, my bios is the BIOS V 1.02.17. I should update direct to the mod? I updated this bios 3 months ago.

( :

Hi my clevo is a P15xEMx. I should use the P151 or the P150? or none of than?

Thanks in advance