bore

I went to the first link to install all intel drivers bar the USB 3.0. User the auto detect and install the latest drivers there (you have to use IE) Intel® Driver Update Utility Then i used the following link for the USB 3.0 https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=3467&DwnldID=22824&ProductFamily=Software+Products&ProductLine=Chipset+Software&ProductProduct=Intel%C2%AE+USB+3.0+eXtensible+Host+Controller+Driver〈=eng Hope this helps

Thanks worked. Like to say thanks to prem the bios resolved the following issues. 1. Resolution was not scaling correctly (Now works) 2. USB 3.0 ports re-connection consonantly (Now works fine) 4. boot button is more responsive 5. getting better performancece in games extra 10-20fps 6. massive improvement in fan control. To be honest i am still noticing improvements. Looking back now can believe how bad it was. 10/10 Great job

Hello, Just updated the bios from W230ST / NP7330 | Prema Mod and all went well apart from a very loud beeping noise. I went in to the bios and set the ram speed to 1600mhz is there anything else i should be changing. If i go in to the bios and wait 1min it started beeping and all indicator lights flash on the keyboard. This last 2min the the pc will shut down by its self. Sounds like something is getting hot. If i log in to windows all seems ok until you put the laptop under a slight load then the beeping starts again and follows the same process as the bios does. Any advice would be good spec i7-4800MQ (2.70GHz) 8GB KINGSTON HYPER-X GENESIS 1600MHz gtc765 250gssd