retmas

Dear Prema, thanks for advice. I tried these steps several times. Now I can summarize: Model: Sager NP9130 (February 2013) - Clevo P151EM1 Stock BIOSRevision: 1.02.17LS1 Stock KBC/ECFirmware Revision: 1.02.11SA Current BIOS Revision: 1.02.17PM v2 (Prema Mod) I load setup defaults and set these settings: UEFI Boot = Enabled OS Selected = Windows 8 SATA Mode = RAID Mode save and exit. After restart BIOS setup window appears automatically everytime. Windows 8 does not load. Because Boot device list is empty: no "Windows Bootloader", no HDDs or SSDs! Maybe It helps. Another question: Is it possible to flash stock BIOS from Sager P151EM17.LS1 (913bv17ls1.7z) after Prema Mod safe and without issues? Should I use instructions from Sager or I can use BIOS Recovery (BIOS RECOVERY | Prema Mod) with USB flash drive contains renamed P151EM17.LS1 (to P15EMx.rom)?

Dear Prema, Many thanks for this huge work at BIOS modifications! I've just flashed Prema's Mod BIOS for my Sager N9130 (Clevo P151EM1). It's OK! But there is small thing: before update I used "Intel rapid storage technology" to accelerate my HDD throught the cache from second SSD. In my system there are two SSDs (Vertex4, M4-mSATA) and one HDD (1Tb Toshiba). So, before update in my BIOS the option "RAID Mode" (SATA Mode) was ON. But after update I can't boot to my Windows 8 (UEFI Mode, Secure Mode is OFF) because no boot device has been detected. If I press F7 during starting of system the list of devices is empty (see screenshot, there is only one option: "Enter setup"). So, in this case Windows doesn't boot and after starting of system BIOS setup shows up always. Any suggestions? How to fix it? Thanks!

I sent an email to Customer service of MYTHLOGIC but no answer received.

Thank you for advice! But I can't find the full palmrest for P151EM1. Where you bought this part for your laptop? Maybe someone knows where to buy spare parts (the full palmrest) for Clevo/Sager laptops?

Thanks! I have got one service manual for P150EM/P151EM1. But it doesn't contain instructions how to remove "Top with Fingerprint (P151EM1)", only schematic diagrams. Are there these photo instructions in the service manual attached in this forum? Maybe you know is it possible to remove "Top with Fingerprint (P151EM1)" without disassembling/removal of LCD?

Hi Guys, I have got a problem with my laptop Sager NP9130 (Clevo P151EM1): touchpad does not work properly. So buttons (left and right) work well, but pointer doesn’t move when I move finger across the sensor space! I have tried ALL software methods: re-installing OS, re-installing last driver and driver from Sager web site, checking it in recovery mode. Any suggestions? I bought new Synaptics Touchpad module with part number TM-01146-003 found in the service manual for Clevo P150EM/P151EM1. I think about changing this module. Maybe somebody has full disassembly video/photo instructions (including front panel removal). Could you please provide this information? Thanks!