OnePingOnly

Great to know the new bigfoot driver resolves this, The following I posted some time ago on a different forum: Hi all, For the Bigfoot 1202 card you can get your wireless led going on a Clevo p170em by changing the following entry in the registry (simply search for "gpioPinFunc0", it should be somewhere under CurrentControlSet): change value of gpioPinFunc0 from 1 to 4 reboot of turn off bigfoot under device manager and then back on again The problem is in the install inf under [ledcontrol2.reg]: [ledcontrol2.reg] HKR, , gpioPinFunc0, 0x00002, "1" HKR, , gpioFunc0ActHi, 0x00002, "0" Now I want it to blink with activity but I've not managed that yet. I sent a mail with this info to bigfoot, no answer or confirmation yet.

Hi all, in the service manual of the p170em on page b16 the schematic of what seems to be an edp connector is given. Does anyone understand how the igp and dgpu signals are connected to this connector. It seems that DP_DCLK# and iGP_eDP_CLK# are both connected to pin 1 (similar for the other signals). Or should I read this schematic differently? By the way, why has clevo chosen this edp connection. The lcd is still connected by lvds from the pch. As I understand from optimus docs, the framebuffer of the dgpu is sent to the framebuffer of the igp throught pci-e, then via fdi to pch and then on to lvds, display port and hdmi. Frank