Tulius

Hi I`m not svl7 but I can confirm that Alienware m17x and m18x GPU Vbios doesn`t have Enduro enabled by default, so don`t worry about it.

I overcloked my two 7970m again with 930/1400 overvolting 1.075v and testing my GPU1 was ok with 1.075v but GPU2 even working wuth crossfire only indicates 0.950v in VDDC sensor in GPU-Z... is it normal? I think the second graphics card can't keep up pace with the first one so it crashes. I dont notice later but now my default card voltage for GPU1 is 1.000v cant go back to 1.075 even when flashing back to default VBios, my second card is 0.950v no matter VBios I flashed in it.

Hi folks,just tried to gain more fps in game with overcloking my 7970M CrossfireX setup(M18X-R2), but I havent`good resuts: First flashed with 900-1300-ov1075v ROM and play Tomb Raider with it, tested with the internal game benchmarking that shows a increase in 10-15 in the FPS levels, but just passed 15 minutes of play and the machine crashed with a horrible sound. Thereafter I turn off the laptop and flashed back to the original bios to try the same level of overcloking, but this time configuring the AMD overdrive with 900 GPU 1300 MEM to test it again in the same game and monitoring the temps played Tomb Raider again and about the same time the game soft crashed turning back to desktop screen... My ASICS scores as follows are 76.6% to GPU 1 and 81.6% to GPU 2. Are these ASIC qualit scores too low for a good overclock? Any ideas about what could I do to safely find the sweet point of these GPUs? Can I overclock if the GPU is downclocked to 1.000V? Thanks for the help in advance =)

Hi, I`m on A10 original bios right now, so to flash to the unlocked A10 bios shall I do the blind flash using the unlocked A10 QBR10EC.fd renamed to M18R2.hdr file? Isn't safer to flash A03 BIOS first and then flash A10 unlocked? Thanks.