Jump to content
Centurion

y510p ultrabay gpu clock does'nt match with default gpu clock after the bios mod

Recommended Posts

Hello guys ,

After modding my bios with svl7's mod to my y510p with gt755m, everything went fine except one thing.My default gpu's core clock shows 1098 and the ultrabay gpu's core clock shows 980.Also range of overcloking is wider on the default gpu than its on the ultrabayed one.I have done that nvflash thing on the second post either.I hope you can make me understand the reason behind this and help me solve the problem.

 

 

Untitled.jpg

Untitled2.jpg

Edited by Centurion

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By svl7
      As it got pretty difficult for me to keep track of all the mod requests I decided to make a separate thread for bios / vbios modification requests. I hope it will make it easier for me to fulfill as many requests as possible.
      If you want to request a mod make sure you read through the following guidelines / rules, posts that do not comply with them will be deleted without further notice.
      Rules:
      You need to have a minimum of five approved posts (or 'T|I elite' status) in order to request a mod. Make sure I didn't already modify the corresponding bios / vbios. When posting a request you agree to flash and test the mod once it's done and post some feedback. (If you don't plan on using the mod then don't bother posting.) I only modify stock firmware. I don't work on anything that has already been tampered with.
      . For BIOS mods I need a link to an original BIOS update directly from the vendor (no mirror link) and most likely a dump of your BIOS (see instructions below).
      I only work on the latest BIOS versions unless there's a very specific reason for using an older one (in this case you need to specify so).
      In addition to this I need a dump of your BIOS as well as some additional information, read the "BIOS backup" section below, provide all the specified files.
      . For VBIOS mods I need a copy of your original vbios. (Only as attachment in a post here or per link to cloud storage such as dropbox, gdrive etc. per PM, filehosters are not accepted). No custom GPU clock requests unless it is for some reason not possible to overclock the corresponding system / GPU per software. No Windows activation mods. Check MDL for this kind of request. I can't guarantee that I will be able to fulfill a request.
      While I will try to keep it fair and consider the order of the requests at least up to a certain degree I will generally work on what I want and feel up to. Popular requests might be treated with higher priority.
      BIOS backup:
      For Intel 7 series chipsets run the attached flashChk tool from DOS and post the created flashchk.bin file (as attachment).
      Also grab this tool, run the backup.bat and send me created file. You will need to run it as administrator. If it reports and issue with the PCIe driver you have a crappy AV software and need to disable it temporarily.
      If you don't use Windows let me know and I will provide a different tool.
      For systems using the 8 series chipsets run the attached flashChk tool from DOS and post the created flashchk.bin file (as attachment) and wait for further instructions.
      - Thread under construction, more information will be added -
      flashChk.zip
      Fptw64_(8_series).zip
      Fpt_DOS_(8_series).zip
    • By adam.jakey
      Hey Everyone. I'm looking through the forums and found out that I can make my old Lenovo a Hackintosh. Is it worth doing? Can you dual boot Windows 10 and OS10? 
    • By PrecastFlame
      Hi, I'm having problems trying to connect a GTX 750 Ti to my Lenovo T420 using the dock EXP GDC Beast (express card version).
      My laptop: Lenovo T420
      RAM: 8GB DDR3
      CPU: Intel Core i5 2520M
      GPU: Intel HD Graphics 3000
       
      My problem is: if I plug the express card and I turn on the laptop it doesn't boot up and the screen becomes horrible, with coloured pixels and a sound like "bip-bip".
      If I try plugging the express card when the laptop is already turned on it sees the gpu, but if try installing the drivers I have to apply the modifies restarting the computer.
      I hope you understood my problem (I don't speak English very well).
      Please help me, It's making me crazy!
       
      EDIT: I didn't say that if I plug the express card when the pc is already turned on, in the device menager there is "Error 12" on the gtx 750 ti
    • By Webshooter38
      Hi all,
       
      I'm debating whether or not to replace the thermal paste in my Lenovo y510p. I've started overclocking a bit, and I have an external fan, but I would like to not have to run the fan as fast because it is a little loud. I have been reading a bit about different thermal pastes, and I'm wondering if there is even a big difference between stock thermal paste, and something like the liquid metal from thermal grizzly. It sounds like it'd work better, but I don't want to fall for a good marketing scheme. If anyone has experience with this and has or hasn't seen big differences, your input would be greatly appreciated.
       
      Thanks in advance!
      -Web
    • By AMan
      Hi,
       
      I recently bought the new Toshiba RC100 m.2 2242 NVMe SSD for my Lenovo Y510p which has an m.2 port in it.
      After installation the SSD wasn't showing up in my BIOS and also not on my OS Win 10 disk management. So I did a bit of research and installed mod BIOS for my Y510p by following the steps in the link: ( https://www.techinferno.com/index.php?/forums/topic/3546-lenovo-y410p-y510p-unlocked-bios-wlan-whitelist-mod-vbios-mod/ )
      There are a lot more options in the BIOS menu now.
      Even after doing the mod it's not showing up. The SSD works on my friend's "new 2017 dell gaming laptop" which has m.2 ssd support in it. I don't know what exactly to configure my BIOS to make it work. I've just done some hit-and-trial configs which have eventually failed.
      If someone can help solve it Pleasee!!
       
       
      P.S. : I can share all the available options available in the BIOS if required.
         
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.