Jump to content

14" Acer Iconia 6210 GTX750Ti@2Gbps+c-mPCIe1 (EXP GDC Beast) + Win10 [Makoto]

Recommended Posts


Hi all, Here is a new success story for egpu on laptop.
During my settings all informations that i needed was found here, so i just want to share my experience. If it can help anyone in future (apologize for my english...)


ACER iconia-6210 (dual screen laptop, no physical keyboard)
CUP core i5 480M
RAM 8gb
SSD 256
Windows 10 pro 64bit

eGPU adapter

pe4c v3.0 mPCIE connecter
Dell D220P AC adapter
Asus GTX750ti (use with hdmi cable to television)


First the mPCIe express slot can be connect with just opening the rear panel, but can not be close after set the egpu.
The first day i did all the connection, swith-on egpu power, switch PC give me nothing, just graphic card fan running and a red light on the egpu adapter.
With turning switch1 to position2 on the adapter solve the problem (green light and windows running)
But nothing automaticaly detected in windows. The device manager show only onboard intel graphic.
In the forum, i saw that sometimes hot plug&play can resolve.
I tried, but nothing detect.

So i decided to buy setup1.3 from nando.
After received it, just install and re-boot. After booting setup1.3 menu, message showed me that no egpu is detected, but after enable port2 form menu, it show "nvidia".
But after chainload windows10, the card was detect as "windows default card".

Tried to install nvidia driver, but the driver could not be install because "nvidia card not found".

I tried to disable the second screen (as the laptop itself have 2 screens), and then the card was correctly detected.
I need to disable the 2 screens on laptop if i want to use the card.

Now everything run perfeclty at 1920x1080 resolution. A really good surprise that gta5 is also playable with 30~50fps(benchmark)
biohazard6 -> max settings
gta4 -> max settings, only view distance is set to half due to cpu restriction.
gta5 -> middle~high settings

My next step is to set the setup1.3 to auto-boot with port 2 enable.
Also to build a rack to put the egpu adapter and power, too many cables on the desk:05.18-flustered:


  • Thumbs Up 1

Share this post

Link to post
Share on other sites

Hi all,

I have created a video to explain and show the adapter working on this laptop. Just have a look if you want to see connection and all.

Share this post

Link to post
Share on other sites

Hi there!

when I connect the gdc exp beast v8 to my Iconia 6210 doesn't works.  the laptop is constantly restarting

Do I need to unlock the Bios?

Thank you


Share this post

Link to post
Share on other sites
On 2017/10/22 at 1:01 AM, Gaidzi said:

Someone have unlocked bios for this laptop?


Just wanted ask the same question.

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.