Jump to content
copyninja

!!help!!! I want to flash my nvidia gforce gtx 680m 4gb mxm 3.0 (alienware m18x r1)

Recommended Posts

ITS INTALLED IN MY ALIENWARE M18X R1

THE ALIENWARE HAVE THE BIOS 04 MODED FROM THIS PAGE

THE GTX 680M 4GB WAS PULLED FROM A ''CLEVO P170EM'' AND THE ACTUAL Vbios IS ( 80.4.29.0.1 )

AND I SAW A POST WHITH A OVERCLOCKED VBIOS IN THIS PAGE.

Clevo 680m (80.04.33.00.10) 'OCedition' revised v01 EDIT by svl7 ...THIS ONE...

CAN IT WORK IN MY ALIENWARE OR IT WILL BRICK MY LAPTOP?

HELP!:confusion::confusion::confusion:

post-37385-14495000685484_thumb.png

post-37385-14495000685645_thumb.jpg

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Similar Content

    • By Reaversword
      Hi, new in the forum, trying to find some help, someone points me in the right direction.
       
      Long story short: Clevo p170hm3 from 2011, gtx485m card dead, new card from ebay, it doesn't works correctly.
       
      I've read about Clevo brand signature, Prema posts about 3dvision license between hardware from ir emitter, gpu and motherboard, Prema modified bios to get gtx580 working too with 3dvision, svl7 (now retired) vbios, and more, but basically, I'm still confused enough to know what should I do and what are the right steps to get my p170hm3 back to life.
      Last card I could buy was a gtx675m, but I couldn't find vbios (original, not-moded from Clevo), the Clevo vbios list "jumps" from gtx670m to gtx680m with no mention to gtx675m , and I read some posts about convert a 675 to a 580 and viceversa, I think it was changing some physical resistances, and some number in vbios, but I'm not modder, no idea really about.
       
      So, What I should do?. Sell 675m and try to get a gtx580m, and use original clevo vbios on it?, it will work, or my computer won't be able to use it?. I bought my computer before gtx580m was released... I would need to update bios to get it working?
       
      Or unlock graphic card restrictions with the latest prema bios mod (if that is possible). There is some chance get 675m working?
       
      Are all mods and files I need in this forum? (ask this because I can't see/access the files, because I'm new in the community)
       
      What options I really have?.
       
       
      I hope someone can clarify me a little bit this situation.
       
      Thanks in advance.
    • By Klem
      In this thread you can post your requests for Lenovo Y50-70, Lenovo Y70-70, Lenovo Z50-70, Lenovo Z70-70, Lenovo G50-70, Lenovo G70-70.
      If someone wants upgrade Wi-Fi card and remove whitelist, or unlock hidden additional menus and settings in bios setup menu, or unlocked vbios for overclock NVIDIA card, then you can post your request in this thread. Also, if you have a problem with fan pulsating/clicking on any modified bios then you can post your request in this thread.
       
      The flashing procedure include two steps:
      1.  Flash main system bios.
      2.  Flash EC firmware.
    • By Psycha
      Hello, I'm on an alienware m17 r4 and am trying mod my vbios for a 970m 3GB msi. I've managed to get the max boost with an increase in voltage, however I believe my voltage settings maybe unstable. When attempting to load programs capable of high gpu usage capabilities, the gpu begins to become pretty unstable. would anyone be able to provide assistance? I have both my edited and original roms as well.
       
      *update
       
      I'm not sure how to delete this thread but disregard this please. I've figured out the issue.
    • By svl7
      Flashing Overview:
       
      - Go to the device manager -> 'Display Adapters' -> chooser your GPU, right click on it and choose disable
       
      - Flash the VBIOS with mnvflash, a modified version of nvflash (see attachments). Below are detailed instructions for nvflash in case you aren't familiar with it.
      - After the flashing is done: Enable the GPU once again in the device manager.
      - Reboot
       
      Detailed Instructions:
       
      As soon as you see the command line you're ready to go, write
      dir and hit enter to display all the files on the USB drive.
       
      Display all Nvidia adapters in the system:
      nvflash -a  
      or alternatively the longer version of the command:
      nvflash --list This command will return you a list with all Nvidia adapters present in your system.
       
      Here's an example output of this command run on my M15x with a 680m in it:
      NVIDIA Firmware Update Utility (Version 5.117) NVIDIA display adapters present in system: <0> N13E-GTX (10DE,11A0,1028,02A2) H:--:NRM B:02,PCI,D:00,F:00 The number in the <> brackets is the index of the corresponding device. SLI users will have more than one entry and flash each card separately.
       
      Backup your current VBIOS:
      Never forget to keep a backup of your original VBIOS before you flash anything non-stock. Use this command to save a copy of the firmware to your USB drive:
      nvflash -b filename.rom or with
      nvflash --save filename.rom  
      Flash the VBIOS to your card(s):
      For a single card it's really straight forward, you don't need to worry about the adapter indices. Just use this command:
      nvflash -6 vbiosname.rom -6 will allow you to override mismatches of the PCI subsystem ID. In case of a mismatch you'll need to confirm the flash with 'y'. NOTE: Users with a non-US keyboard might need to press 'z' or similar, because the 'y' isn't at the same location for all keyboard layouts.
       
      SLI users will need to flash each card separately. The concept stays the same, but you will need to use the corresponding adapter index to flash a card. How to figure out the adapter nr. is described above.
      Flashing goes like this:
      nvflash -i[index] -6 vbios.rom [index] represents a number, namely the index you found with the 'nvflash -a' command. So a command example to flash a card which has index 0 is: 'nvflash -i0 -6 vbios.rom'
       
       
       
       
       
      Donation link
       
      In case you want to buy me a beer
       
      Thanks and cheers! 
    • By Brian
      The new leak of NVFlash version 5.513.0 with their new RTX GPU (Turing) support is now available in our download section. This includes support for NVIDIA's new RTX 2080 Ti, 2080 and 2070 desktop GPUs. As always, use caution when reading/writing vbios files as you can potentially brick your card and void your warranty. 

      View full article
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.