
-
Similar Content
-
By IveGotRoot
I have recently upgraded my laptop(an M6800 firepro 6100) and replaced it with an GTX 980m. Nvidia says that the latest driver(461) supports my card but i can only install up to 388.13 Ive tried to mod it but i can't figure it out. I can run the latest linux driver tho
-
By Freddyicy
I have spent a little time in the past few days looking around this site. I would love for someone to point me in the right direction to a forum that has information that could help me out with my problem.
I have a:
Alienware M17XR3
Windows 7 Home Premium 64-bit
Intel I7-2820QM 2.3
Bios InsydeH20 Version 1.0 A12
NVIDIA GeForce GTX 460M
(4x) 4 GB Ram
samsung 2.5" 256 SSD (SATA3.0Gbps)
It has been an amazing machine for the last 10+ years. Minor issues, nothing that an Alien Respawn could not fix, till now! On battery power it works just perfect. Then I plug it in and it's all OK until I try to do anything, and then the screen goes white. The screen sometimes goes yellow, sometimes blue, but mostly white screen. It will do nothing until I do a hard reset (holding the power button till it turns off and turn it back on) with the power unplugged. If the power is not unplugged then it will go through boot up to windows swirling dots then go white again. If I plug it in and do nothing I can charge it, unplug and continue what i was doing. I have tried a lot of solutions bouncing around the internet, and thought I was having a DC Jack connection issue (replaced the ac/dc power adapter, then the motherboard). I get a better connection now but with the same white screen result. I stumbled into this forum and I'm hoping to find solutions to my issues. Then upgrade like so many others have.
Any ideas, comments or suggestions welcome.
Thank you in advance!
-
By TheFlameParadox
Hi everyone,
i'm writing this post to ask you if someone is interested about making for me an overclocked gpu vbios.
I have a Dell M6700 with a NVIDIA K3000M and i' m kinda good with it but i m searching about getting more performance from it.
So basically i want to have a 850 Mhz OC vbios rom and a 950 Mhz OC vbios rom, is there anyone that can do this for me please ?
I tried using kepler vbios tweaker but i remains stuck at 548.9 Mhz without going up and i can t figure how to do it.
I'll attach my VBIOS BACKUP CLEAR COPY.
PS: Tech Inferno seems to have upload problems now so if you want the rom image contact me pls asap
-
By pippocarlot
Hello everyone! I am looking for an answer to a problem I cannot find a solution to ... I purchased an Amd wx 4150 MXM GPU module su e bay to upgrade my HP 8570W Mobile Workstation which is currently equipped with a Fire Pro M4000. Once the new GPU has been installed, the PC screen no longer turns on but works only with external monitors connected via the docking station. The same happens once the drivers are updated! If I put the old card back on, the integrated monitor starts working again ... How can I fix it?
-
By svl7
NVIDIA 'Maxwell' VBIOS mods
Here you find modified VBIOS versions for the mobile parts of the Nvidia 'Maxwell' series.
The VBIOS versions in this post are tweaked for performance and versatility. You'll get almost complete control over the performance parameters of your GPU.
List of available VBIOS mods:
Nvidia GTX 970m - 'OC edition' rev0 - >> 6 GB Version << - modified by @johnksss & svl7 -> see attachments Nvidia GTX 980m - 'OC edition' rev0 - >> 8 GB Version << - modified by @johnksss & svl7 -> see attachments
Screenshot demonstrating the capabilities of the 970m versions:
>> Read the instructions carefully before flashing! <<
If anything is unclear after reading or if you have additional remarks, please post in the thread.
Flashing:
- Go to the device manager -> 'Display Adapters' -> chooser your GPU, right click on it and choose disable
- Flash the VBIOS with mnvflash, a modified version of nvflash (see attachments). Here are detailed instructions for nvflash in case you aren't familiar with it.
- After the flashing is done: Enable the GPU once again in the device manager.
- Reboot
Do NOT use driver 347.09, it's broken and useless and won't allow you to overclock, even with the stock firmware.
Don't distribute the files hosted here outside of Tech|Inferno. Don't modify the files you download here.
Donation link in case you want to buy me a beer
Thanks and cheers!
-