Search the Community
Showing results for tags 'post error'.
Found 2 results
Hello guys I've got a pretty weird problem with my M18x R2. I already searched the web but couldn't find an answer. A few days ago I changed some settings in the bios, if I remember correctly DMVT Pre-Allocated. After saving this setting the notebook refuses to even POST. I get no beep errors or anything. If I press the power button the system turns on, the leds turn on and then the system shuts itself off. I already reset the cmos, the IME, tested different configurations and so on. If I remove all the memory sticks I actually get the memory error code. At this point I'm pretty sure that the bios got corrupted for some reason when saving these mentioned settings. Did anyone had a similar problem and got a solution for this? I repaired lot's of notebook but never had an error like this... The Bios installed is the a15 unlocked.
Hey guys, I know I've seen many forums covering this topic (including this one) but I just recently installed the 980m in my M17x R4 with the 120Hz screen. I found an interesting trick that helped tremendously. Just wanted to share in case it may benefit someone else. I won't include all of the steps to the process as those are thoroughly covered elsewhere. Okay, so you have the card (980m) installed but it doesn't recognize it yet (no drivers / need to change bios settings etc.) meaning that you immediately get the 8 beep error on startup. A lot of forums say you need to reinsert your old graphics card to access menus, then switch it back to 980m. I've found that through using the HDMI out and connecting to another screen, it will actually stop the 8 beeps and you regain post. It will post only on your laptop, not the screen connected through HDMI. I believe this is due to the 120Hz not being supported when connected to an external screen, it makes it function as a 60Hz and seems to resolve the 8 beep posting issue making it possible to change your settings and even install the (modified) drivers on the desktop. I hope this helps to ease someone else's process in the future.