Search the Community

In this thread you can post your requests for Lenovo Y50-70, Lenovo Y70-70, Lenovo Z50-70, Lenovo Z70-70, Lenovo G50-70, Lenovo G70-70. If someone want upgrade Wi-Fi card and remove whitelist, or unlock hidden additional menus and settings in bios setup menu, or unlock vbios for overclock NVIDIA card, then you can post your request in this thread.

Hi everyone, hopefully someone can help. I have successfully (to a fashion) installed a new 970m in my laptop, it is discovered in the BIOS and Device Manager. The card seems to run, I can see it in GPU-Z and the temperature and clock speeds are displayed in GPU-Z. Windows 10 installed the driver on it's own and I modded and installed the latest NVIDIA driver 361.43. I'm seeing a low score (lower than my 860m) in 3Dmark and a lower clock speed (540Mhz) instead of what I would expect (somewhere around 900). Guessing I need to install an earlier driver, the optimus switching isn't working on the FN+F5, but I'm not sure which driver to choose as the older recommended one doesn't show in the NVIDIA search. i7-4710MQ 16GB DDR3 PC3-12800 480 mSATA 256 SSD ST500 Hybrid SSD BIOS version A14. I've attached a screenshot from 3Dmark for reference. Anything else I can supply to help? Cheers

Hi guys, I've been following your threads for a little while now, and to this dat I've almost always found what I was looking for, or close enough. Unfortunately, I've now encountered an issue that seems pretty damn unsolvable, and most frustrating I can't even get where I could have screwed up. Here is the story, I got few months ago the Aorus x7 v2, with a 860m SLI as GPUs. It is quite a decent laptop, but lately I started to look into a possible flash of the vbios, in order to override the +135mHz limitation. That's something I've already done before without particular issue, so I wasn't overly worried about it, besides the fact that this time I had to deal with a SLI. So got the appropriate vbios there https://www.techinferno.com/index.php?/forums/topic/1425-nvidia-kepler-vbios-mods-overclocking-editions-modified-clocks-voltage-tweaks/ and followed once again the tutorial over here https://www.techinferno.com/index.php?/forums/topic/1687-guide-nvidia-vbios-flashing/ . The thing is that, as a matter of fact, everything went fine, for both GPUs the update was successful and then I restarted my computer... Unfortunately that is where everything went wrong : my screen doesn't light up anymore, and I can't do anything to set things right. If any of you have ever been in a similar case before, or have an idea to solve this, just let me know. Cheers, Karajan EDIT : So I managed to get something by using an external screen. The flashing actually worked, since I can now go beyond the 135mHz limit, but one of my cards is not detected anymore, an neither is my original screen.

Morning all, First post . I have a Clevo P150SMA, it's about 6 months old now. Luckily I have some really nice temps at the moment:- CPU/GPU never seem to go above 60c. So I though let's overclock! I have flashed prema mod BIOS and now have no idea what to do next to overclock. I'm used to overclocking on AMD desktop machines but not Intel/nVidia laptops . I normally dual boot linux/windows, linux is my main OS and windows I use for gaming so I would prefer BIOS overclock, although for GPU this is not that important. MSI Afterburner does not allow me to overclock. So I far I believe the best thing to do is flash a vBIOS for the GPU to allow overclocking in afterburner and overclock the CPU in BIOS. My question is how do I overclock the CPU in BIOS and any other advice. A guide to prema mod BIOS overclocking would be great but I can't find anything.

Morning all, First post . I have a Clevo P150SMA, it's about 6 months old now. Luckily I have some really nice temps at the moment:- CPU/GPU never seem to go above 60c. So I though let's overclock! I have flashed prema mod BIOS and now have no idea what to do next to overclock. I'm used to overclocking on AMD desktop machines but not Intel/nVidia laptops . I normally dual boot linux/windows, linux is my main OS and windows I use for gaming so I would prefer BIOS overclock, although for GPU this is not that important. MSI Afterburner does not allow me to overclock. So I far I believe the best thing to do is flash a vBIOS for the GPU to allow overclocking in afterburner (windows only but that is fine for GPU) and overclock the CPU in BIOS. My question is how do I overclock the CPU in BIOS, is the above the best thing to do and any other advice. A guide to prema mod BIOS overclocking would be great but I can't find anything. Thank you all.