lolo

On 4/2/2018 at 7:03 PM, Wulfy4you said:

Did you get the last Problems (questions) sorted as I kind of am running in to the same thing with my Fujitsu T734  testing a GTX 460 with the PE4C V3.0.

 

Some of your setup steps confused me but got it sorted and got the soft from ****** to do the dsdt overide and compaction to 36 bit to make the GTX 460 work and even tested 2 GTX 1070 cards, avoid the GTX 1070 G1 Gaming from Gygabyte it will not work the Fujitsu will not detect it atached.

Went to an other friend with a Palit GTX 1070 Dual model and it worked after I got past the ERROR 43 problem by clearing the drivers with Display Driver Uninstaller and clean installing an older driver 372.70 64 bit as I am runing on Windows 10.

 

One problem still remains, wish some one to help...

both the GTX 460 and the GTX 1070 ran/run at speed of the 1.1 PCIe bus and  

any attempt to retrain the bus to force it to PCIe 2.0 at least is unsuccessful and card is unusable in Windows. 

 

If you can help or ******, I would apreciate it, I plan on getting a GTX 1080 and runing it at the 1.1 bus really is a bummer.  

If you have any questions, I'll try to help!

On 3/23/2018 at 5:33 PM, Irwandee said:

Is it also works with exp gdc too?

what this have to implementation guides ?

On 1/11/2019 at 8:00 AM, logout20 said:

HP probook 4530s ,windows 10,gtx 1070

i can't use my egpu while booting,i have to plug it after booting,it gets detected,i have done DSDToveride,cleaned the driver with DDU and i have applied ******'s script 43 fixer,

even after that i am getting error 43.please help.

 

i am using expesscard. gen 1 in bios.

its a galax 1070exocsniper

Psu cx450

 

LED of gpu is turned on but fans are not spinning.

Also windows cant boot with egpu plugged in.

what this have to implementation guides ?

On 6/13/2017 at 7:34 PM, runix18 said:

Just flashed your bios and I can confirm it works, no errors, no boot fails, no heart atack(thx for that), the one ting I couldn't work out it is that it does not keep the fast boot option to enable, it always goes disable after restart (booting on pure Uefi from samsung nvme drive formated as GPT)

Where to find M11X R3 Bios upgreade ?

Where to find it ?

It is realy working or brick the system?