Treleo

thanks very much!!! Very Helpfull!!!!

I have the same issue... but nothing helped...

On 1/25/2017 at 7:54 PM, kogoro said:

I finally dowloaded the prema biosmod and the modded bios was inside , i also give a little money to prema to thanks him.

After some hour of search because of some  "resume from hibernation"  problem which didn't allow me to enter the bios non modded  ( problem solved only type  shutdown /s /f /t 0  on the command window and you will have a full shutdown )  i finally found the version of my bios : 1.03.01  , i also found on an other website a newer bios for the computer   (http://forum.notebookreview.com/threads/clevo-bios-older-models-released-in-after-2014.790474/ )  1.05.01 "support for win 10"  , i am already in win 10 ^^ , my question: should i install the premamod bios now or should i update the EC and bios before ????

and second question does the premamod bios change something about pciessd compatibility ? (nvme   3.0  etc. )????

THANKS for reading !

 

did you found any solution about NVME disks support? Thanks in advance

Windows installer CAN SEE my drive... BIOS CANNOT SEE the drive... so I can normally see and format and install windows 10 on this disk, but after PC reboots bios search for disk to start. see nothing as always and does not start booting cause BIOS cannot find if there is a disk to boot from... 

windows installer (f it is windows 10) can see it normally ... You can also intall windows and make all partitions ect... But when is trying to reboot and bios trying to find drives to boot from... cannot see the M2 NVMe disk but only the installer disk or usb drive. So it starts installation from beginning...

So the problem is to be able to see it from BIOS and not only from windows installation disk/drive. 

I have a  Clevo P651SE but does not recognize from DOS or BIOS my new NVMe SSD 960 EVO Samsung... so I cannot boot from that disk. If I boot from windows the disk is visible through windows as secondary.... what I must do to fix this... Bios Update or just some adjustments?