paypaytr

9 hours ago, Mr_Western said:

@paypaytr

Did you boot up with the GPU already attached? Also, did you try scanning for hardware changes in Device manager to see if it comes up?

Also which GPU dock is it, check in the bottom left corner to see which it is, because I have the latest version (beast 8.4d) and my light color is blue not green.

And one more thing, while you are in Device manager, click on view (top bar) and click on "show hidden devices", see what is under the display adapters now, there should be something other than hd 3000, take a screen shot and post it.

yes i did with gpu attached. yes i did  scan every time. latest one 8.4 beast. color is green. i did hidden devices nothing comes up.

btw there is a switch under surface says atx pow switch on off and some other says  15z 7s and off

should use some screwdriver to  change atx power to off to on?

Hello everyone

i bought gdc express adapter from banggood and i have 750ti,300w psu for it. I have lenovo x220 laptop with 8gbram. This laptop seems like working like charm for most people but i cant run egpu on this

I mean i connected everything fine 

psu 24pin cable to 20pin thing came with adaptor

psu 4 pin to 4 pin came with adaptor

gpu to dock

gpu output to hdmi via monitor(both tried hdmi and vga)

no luck, both psu and gpu fans are starts to work when i press power , green led is up but i cant detect hardware anywhere. Using clover boot loader some people in this thread said use nvidia inject from clover bootloader options but that doesnt detect in bootloader. In windows hardware manager only shows hd3000.

if you try to connect egpu while system is up both psu and gpu ram goes crazy.

what should i do

All Parts pictured

X220 lenovo thinkpad with 8GBRAM 

asus gtx 750 ti 2gb model which doesnt have ports to connect PSU LOW power one

300W everest psu

gdc express card version.

resim

Hello everyone

i bought gdc express adapter from banggood and i have 750ti,300w psu for it. I have lenovo x220 laptop with 8gbram. This laptop seems like working like charm for most people but i cant run egpu on this

I mean i connected everything fine 

psu 24pin cable to 20pin thing came with adaptor

psu 4 pin to 4 pin came with adaptor

gpu to dock

gpu output to hdmi via monitor(both tried hdmi and vga)

no luck, both psu and gpu fans are starts to work when i press power , green led is up but i cant detect hardware anywhere. Using clover boot loader some people in this thread said use nvidia inject from clover bootloader options but that doesnt detect in bootloader. In windows hardware manager only shows hd3000.

if you try to connect egpu while system is up both psu and gpu ram goes crazy.

what should i do

resim