john.wayne
-
Posts
9 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by john.wayne
-
-
Hello, i have an issue my laptop (HP 470 G1\iGPU HD4600\dGPU AMD8750m) hangs on boot before bios, with EXP GDC 8.3.
I tried CTD\PTD switch but no result in any position.
I tried to tape pin22 on mPCI to get through boot with my eGPU attached - no result.
My questions:
1. Is there any other way to get a delay and go through bios?
2. Is there any other trick (like pin22 trick) but especially for EXP GDC to trick my bios? I beleive pin22 trick was not for EXP GDC? -
-
On 09.02.2016 at 6:26 PM, ahmed khalifa said:
I am connection 6 and 8 pins as shown to eGPU (EXP GDC Beast). can I connect them directly to PSU instead of eGPU ?
same question, i think you can, could you make an update about your situation, were you able to to it?
-
Main question here, can gpu's 6+6 be powered from ATX 6 pin or 4pin molex to 6 pin directly?
-
33 minutes ago, Minihack said:
Hi,
This is true. If you are powering the unit from an ATX supply then just use the cables from that to power the card. If you are using a power brick though and want a simple splitter this will do the job I think: http://www.ebay.com/itm/NEW-male-to-male-6-PIN-PCI-EXPRESS-Y-SPLITTER-POWER-CABLE-12-MADE-IN-AMERICA-/261465988702?hash=item3ce0965e5e:g:G5AAAOxyOalTXrXo Remember the GPU must be inside the power limits of the power brick and also be 150w or less.
Well, i want to use my old ATX (400 something) , it has 20 pin+4 pin, but doesn't have any 6pin connectors, if i will use this 6 pin to 2x 6 pin cable just with exp gdc i will be fine? Also if i can use my ATX to power gpu 6+6, what if i will use http://img35.olx.ua/images_slandocomua/245370216_1_644x461_kabel-dlya-videokart-maxxtro-pci-e-6pin-02-m-cc-pcie-alchevsk.jpg something like that 2 molex to 6pin. two of them will do the work with my gpu? And if exp gdc and gpu will be powered directly from ATX everything will be fine?
-
Hi people, now v8.** doesn't include this 6pin to 2x 6pin cable
What to do? Where can i find one? Without it gpu won't work right? Maybe there other places where i could buy it, some links will be great!
-
Hello people, i have few questions, please help me clear things up:
I have HP Probook 470G1 / i3 4000m / intel HD 4600+AMD 8750m / HM87 motherboard
1. Can i disable AMD 8750m, and use eGPU Saphire 7950 instead?
2. In EXP GDC v6.0 or v7.0 there a power supply 220w, will it be enough for Saphire 7950?
3. What speed i can achieve with HM87 motherboard? Will it be 4gb 1x 2x?
4. Saphire 7950 has 6+6 power connectors, EXP GDC v6.0 or v7.0 has those cables?
5. And the most important question will it work out the box? In windows 10, without any hard things to do, just plug and play?
-
Hello people, i have few questions, please help me clear things up:
I have HP Probook 470G1 / i3 4000m / intel HD 4600+AMD 8750m / HM87 motherboard
1. Can i disable AMD 8750m, and use eGPU Saphire 7950 instead?
2. In EXP GDC v6.0 or v7.0 there a power supply 220w, will it be enough for Saphire 7950?
3. What speed i can achieve with HM87 motherboard? Will it be 4gb 1x 2x?
4. Saphire 7950 has 6+6 power connectors, EXP GDC v6.0 or v7.0 has those cables?
5. And the most important question will it work out the box? In windows 10, without any hard things to do, just plug and play?
EXP GDC Beast/Ares-V7/V6 discussion
in Enclosures and Adapters
Posted
I hotswap too, kinda. I turned off my dGPU, and boot with setup 1.3(and enable port there)+dsdt override, then sleep mode to make it work. Right now i don't know how to get the bios delay. If there will be any news please post it here.