beaver135

Hi there, try this out...AW17 (Optimus) similar problem.

THANK YOU,

seriously thanks mate you saved me it worked fine i was just about pulling my hair out switching from a 7970m to gtx 970 but everything seems to be great now,

Hi

Can anyone help me with modding the inf for 358.50-notebook-win8-win7-64bit-international-whql ?

Gtx 970m 6gb

PCI\VEN_10DE&DEV_13D8&SUBSYS_51051558

Clevo P150em

Win 8.1 Pro

i have already tried modding nvami.inf

which let me install everything( with driver signing off) but black screen after restart,

tried modding nvci.inf but back to not detecting card /unable to install,

I also tried both of them modded and same result black screen with occasional white dot on bottom left corner on boot up

DDU removed all Nvidia from pc

I'm pretty sure i just havent modded the right inf or not modded it correctly

Any info or advice would be much appreciated.

thanks

You need to set the BIOS back to Win8 and UEFI enabled mode after flashing a BIOS.

Also when going from AMD to NVIDIA card Windows sometimes also needs a fresh install.

thanks for the response but unfortunately it still wont boot also i am on win 7 not win 8

Safe mode will work. It won't BSOD if the display drivers are not running.

the system wont boot into safe mode when it gets to windows/system32/DRIVERS/amdkmpfd.sys it bluescreens then reboots

btw i appreciate your time for answering these questions

Switching between AMD and Nvidia cards on systems with the iGPU as primary often requires a windows reinstall. Go into safemode and uninstall any GPU utilities like TRIXX, MSI afterburner, and Nvidia Inspector and see if that fixes it. If not then sadly you need to reinstall the OS.

thanks for the quick response i will try this today in about 5 hours when i get home from work,

just in case i can't get into safe mode should i let the windows system recovery run?

Hi

i currently have a clevo metabox p150em i had the original 7970m die so i just bought a 970m 6gb vbios 84.04.22.00.11

my old bios was

1.00.04 bios revision

1.00.05sa kb ec firmware

so i updated to premamod P150EM_17_11_PM_v2

seemed to flash alright full functionality of the new bios but now wont boot into windows i get a quick flash of a blue screen and then it takes me to windows system recovery,

any help regarding this would be much appreciated

Clevo P150EM

(Broken )AMD Radeon HD 7970M 2GB GDDR5 graphics

Screen type: 15.6" FHD 1920x1080 LED/LCD 95% Gamut Gloss

Processor: i7-3610QM Ivy Bridge CPU 2.3GHz up to 3.3GHz

RAM memory: 16GB DDR3 1600Mhz RAM (4 x 4GB)

Intel mSATA: Intel 40GB mSATA SSD

Primary drive: Primary drive 500GB 7200 rpm HDD

Optical drive: Dual Layer DVD+/-R/W optical drive

Optical HDD Caddy

Clevo P150EM

(Broken )AMD Radeon HD 7970M 2GB GDDR5 graphics

Screen type: 15.6" FHD 1920x1080 LED/LCD 95% Gamut Gloss

Processor: i7-3610QM Ivy Bridge CPU 2.3GHz up to 3.3GHz

RAM memory: 16GB DDR3 1600Mhz RAM (4 x 4GB)

Intel mSATA: Intel 40GB mSATA SSD

Primary drive: Primary drive 500GB 7200 rpm HDD

Optical drive: Dual Layer DVD+/-R/W optical drive

Optical HDD Caddy

Win 7 Pro

I have a Clevo 7970M v1.1 for sale. PM me if interested.

Hi Mate

I have just bought a new 7970m since my old 7970m died in my P150EM,

but i fear i have bought an incompatible 7970m as a replacement ,

i am unable to PM you as of yet due to low post count but i might be interested and would rather not wait ~20 working days from china like before.

Hello Everyone

brand new to the forum first post