skill7899

what is differnet with EC AND 2nd EC

if i run step1 , the computer will reboot? if yes,my computer maybe blank screen,so i would try many times to entry bios。and then i run step2 the screen will xxxx cpu xxxx

If the step1 and step2 must be continuous?

can you make a program to flash this bios without reboot this computer , because i run step1 , my computer will reboot, and then it will be blank screen , i can't run the step2

Use this:

https://mega.co.nz/#!3A1BWKDa!TvwxBT2EySrycAjlV1VgILuGvDVqKluF-OGaWFS-veI

Connect AC Adapter

Use F7 to boot from DOS-USB

run step1

Use F7 to boot from DOS-USB

run step2

what is differnet with EC AND 2nd EC

if i run step1 , the computer will reboot? if yes,my computer maybe blank screen,so i would try many times to entry bios。and then i run step2 the screen will xxxx cpu xxxx

Yes, step1 will auto-reboot.

If it does not reboot you have to repeat step1 each time until you get a direct reboot afterwards in order to successfully complete step2.

If the step1 and step2 must be continuous?

Then it'll throttle @ 90c no matter if the "prioritize temperature" is ticked or not as my vBIOS has TDP limiter disabled it'll always adhere to thermal limits.

Just set it to 60c or 70c, leave the box anticked and watch it throttle at exactly that threshold.

What exactly is the problem?

Not booting at all?

Freezing?

Very seldom i can entry bios , but it's blank screen all the time

It didn't flash the GPU, because it was unable to detect it. Probably the system was in iGPU mode.

Disable the NVIDIA driver then flash the card again.

With the unit switched off, remove AC Adapter for 30s after the flash.

If you have done that, then make a CMOS rest.

thanks for your reply, i try to do it,but failed.

i flash the p375SM_33_31_PM2 , now, my computer can not entry bios or black screen or down