Jichao
-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by Jichao
-
-
tion using WWAN (port 1) WLAN (port2) EC (port3) and E3 Module (port4) with a custom made connector.
Offcourse all this could happen if there is a way to enable flashing the machines Descriptor Region with fitc/fpt.as in my HP with the key combination? I just hope I don't have to completely take this apart to find my ALC chip. (I have the schematics so it is gonna be easier)
-
- ect up to 4 simultaneous LCDs.
[*]easy, on-demand attachment without a reboot if running Win7
[*]can be reused after a system upgrade, or shared amongst multiple systems
[*]see an extra 30-60% in performance when attached to an expresscard 2.0 system, or do a x2 1.0 setup
[*]provides an additional USB port when connected to expresscard slot
[*]Time-share your desktop video card b/w your desktop and n
- ect up to 4 simultaneous LCDs.
-
- Remove battery
- Hold power button for 30 seconds
- Remove CMOS coin battery (next to GPU fan)
- Remove gtx 770m -> 2 screws only, there's no need to remove the heat sink.
- Reinsert CMOS battery
- Plug power cord
- Power on -> Beeps -> hold power button until shutdown.
- Power on -> F2 -> disable the integrated graphics - Second Advanced Menu -> Video Configuration -> disable IGP -> set display to PEG -> Exit menu 'Save Without Exit' -> shutdown.
- Reinsert gtx 770m.
- Power ON -> F2 -> shutdown.
- Reinsert Battery.
I really dont know what is going on, but if there is no such thing as primary or secondary vbios,
well, then alienware users will not be able to upgrade GPU to 980m. At least now when there is no "general" unlocked vbios for it.
I am sure I have done the right thing to upgrade. (unlocked bios, disable IGP, primary PEG... ect) as I've done it more than "many" times.
There's no such thing 'primary vBIOS', check the ones for 17" Clevos single GPU models. My cards are all Clevo/Sager. Since I can't flash using SG (3D), I always ask for the closest/matching model.
Good luck mate!
-
ello, I have a Y580, and my BIOS mod request is for the extended ICC section under Advanced in my v2.07 BIOS to become unlocked for unlocked CPUs. I have a 3920XM which is an unlocked CPU, however I am unable to increase its multipliers (I can decrease them but where's the fun in that..). I posted the following information in order of the quote's questions (first quote bullet = fir
-
is is too much risk it mighefficiency loss of the PSU, but still Nvidias specs of 145W TDP aren't right, as there
- - - Updated - - -
MBPr 15", 2,5GHz i7, 16GB Ram, 512GB SSD (mid 2014)
with
Thunderbolt 2 eGPU EVGA GTX 970 FTW+
------------------------------------------------------------------------------
-
EFI enabled and legacy room DISABLED.
I cannot disable legacy room in the bios (A013): "can't detected mxm card gop driver"
I tried to flash the bios and I looked at this thread: http://forum.techinferno.com/alienwa...-*solved*.html
But there's no version for the 675m card.is is too much risk it migh
-
that is cooll ok n BIOS Win 8.1 Pro (at least with DIY eGPU 1.2)ut I'm nowhere near the level of savvy that you and some of the other contributors are I may build my own desktops, but I've got what I'd think is a minimum of knowledge about the electronics therein.. something I sadly never got into learnin
Setup 1.30 Discussion
in DIY e-GPU Projects
Posted
neeed fix that gpu tweak