andrizmitnick

wanna ask, about x1 and x2 capability, which one is more stable? btw about ordering an PE4C with soldered cable option, how i can order that? thanks hehe

The PE4C has a full length slot and is x2 capable. It is highly doubtful that your system can do x2, as systems with a dGPU tend to have few mPCI-E slots. Even if it could it will be complicated trying to set the ports to x2. As for only 50% performance it depends on the game. Some will run just as fast on x1 2.0 as x16 3.0. Some will only run 30% as fast. It varies, but you're usually around 80% with x1 2.0. The eGPU will still work with the 460m enabled, but performance will be poor with the 460m outperforming it in many situations. With the 460m disabled the eGPU will be overall much faster.

are u using x2 or x1 capability? which one is more stable? btw about ordering an PE4C with soldered cable option, how i can order that?

The card will only run up to gen2. You will also need to disable or physically remove the 460m to get the optimus performance benefits. Nando4's setup program can disable the card.

- - - Updated - - -

Have you installed a graphics driver for the 970?

so, those 2 model is just the same that can only running up to gen2? hmm, i need to disable the 460m to use my eGPU properly? btw when using the eGPU, the performance of the graphic card will be adjusted to just only 50% of desktop pc appliance? sorry if asking so many question

just consider of buying the eGPU, i have asus g73sw with gtx 460m on it, and i want to use my eGPU with the mPCIe port, it look's that PE4L v2.1 support up to gen3, is it true? is anyone had already done gen3 with this model? if comparing PE4L v2.1 vs PE4C v2.1, which one is recommended? thanks

Emailed to BPlus requesting a PE4C 2.x with soldered cable option. They're solution is to provide a free 50cm (shorter) cable to affected users. I'm thinking a better fix for affected users would be to provide a PE4L 2.1b (??). See discussion below:

To which BPlus replied today with:

just consider of buying the eGPU, i have asus g73sw with gtx 460m on it, and i want to use my eGPU with the mPCIe port, it look's that PE4L v2.1 support up to gen3, is it true? is anyone had already done gen3 with this model? if comparing PE4L v2.1 vs PE4C v2.1, which one is recommended? thanks

night everyone, btw i need some advice, i have ASUS G73SW and GTX460M on it. and i've been thinking of for upgrading my gpu to the lastest model, like GTX 970M, or at leat 870M, but i didn't know if it would fit my chasis or not, anyone have advice for this? or maybe the lastest model possible to upgrade is just 770M? i'm interested on this model " http://www.ebay.com/itm/Nvidia-GeFor...item3ced3e125a " , is there anyone had successfull upgrade with newer gpu than 770M? like 8xx series or 9xx series? thanks