jjbron

So I've figure out that the reason for my "NVidia driver has stopped working" issues is my fridge: every time my fridge compressor turns on, my screen goes black and the "NVidia driver has stopped working" occurs. I'm not really sure how to fix this, besides using a different outlet for my fridge (so. many. extension cables). Would using a PSU instead of the DA-2 solve the problem? I've also heard that using a higher quality HDMI cable might solve the problem. Anyone know where I can buy a better HDMI to mPCIe cable?

I'm using a Dell DA-2 atm, (model D220 P-01). It says it can output 12A-18A. Wait, can the y470 + 560ti + EXP GDC v6 run at Gen2? bron == fish?

I'm an idiot. Turns out the DVI cable was broken. THANK YOU ALL. IT LIVES! NVIDIA GeForce GTX 560 Ti video card benchmark result - Intel Core i7-2630QM Processor,LENOVO Base Board Product Name EDIT: actually the screen goes black every once in a while when gaming, and "The display driver has stopped responding" appears. Any ideas?

Hello, I've got my eGPU installed & drivers installed (device manager says the device is working properly), but I can't output anything to my external monitor. (Turns out I didn't need to whitelist anything). In Setup 1.30, I run set eGPU port width to Gen2, PCI compaction on iGPU + eGPU, then Hot Reset my eGPU port, then Chainload Mbr. In Windows 7, in the screen resolution window, what I see is "Available display output on: NVIDIA GeForce GTX 560 Ti", and my only options are "No display detected" and "Try to connect anyway on VGA". Any ideas @Tech Inferno Fan?

Sadly I've tried disabling the internal GPU, and nothing changes. Whenever I plug in my EXP GDC, the screen goes out: if it's in Setup 1.X, the screen goes blue; if it's mid-boot the screen stays black; if it's in Windows; the screen goes white/blue. I think it's a whitelist issue, I've noticed that Setup 1.X isn't detecting my mPCIe port. However, when I try to restore the port, Setup 1.X gets stuck in "gathering resources to build screen". Any ideas?

Hi, I'm trying to get my y470 + EXP GDC v6 + 560ti setup running, but anytime I plug my eGPU into my laptop (w/ mPCIe cable), my laptop instantly freezes (screen blanks out) then turns off. I've tried booting with the cable in (black screen), and plugging the cable in while my laptop is asleep (black screen when resuming). I think the issue is my y470 has a whitelist on the mPCIe port? I can chainload mbr without any problems, and I used DDU to get rid of my dGPU drivers. However, every time I try to restore a port, Setup 1.30 hangs on "Getting details". Every time I try to restore all ports I get "Abort, Retry, Ignore, Fail". Any ideas?

The user I quoted used both the ATX adapter cable & 3 x 6pin. If I use the ATX adapter, do I need to put cables into my gpu's 2 x 6 pin ports?

Hoping someone could clarify using an ATX PSU. My gpu (560 ti) needs two 6pins, so do I need three 6pins total on my ATX PSU (one for the EXP GDC, 2 for the gpu)? Or, couldn't I just use the 6-pin to dual 6-pin, modular cable but power the EXP GDC with an ATX PSU? (so basically the normal DA-2 setup, but with an ATX PSU instead?)

So I don't need the 6P+6/8P pcie lead if I'm using a ATX PSU? and where's the "no power" EXP GDC on yoybuy (I can't find it searching yoybuy)?

So I don't need the "6-pin PCI-e power cable"?

Just to clarify something, if I want to use an ATX PSU with the EXP GDC v6/v7, do I need to buy the 'ATX power cable' and the '6-pin PCI-e power cable'? If so, is it possible to buy both cables off yoybuy? Thanks