sebalot
-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by sebalot
-
-
Hello everyone .
I have a laptop : packard bell easynote lv44hc
Here are the feature :
Operating System
" Windows 7 64-bit
Processor and Chipset
" Processor Manufacturer : Intel
" Processor Type: Core i3
" Processor : i3- 2328M
" Processor Speed : 2.20 GHz
" Total Heart Processor : Dual -core 2 Core
" Chipset Manufacturer : Intel
" Chipset Model : HM77 Express
memory
" Memory: 4GB
" Maximum Memory : 8GB
" Number of Total Memory Slots : 2
" Memory Card Reader : Yes
" Memory Card Supported : Memory Stick
" Memory Card Supported : MultiMediaCard MMC
" Memory Card Supported : Memory Stick PRO
" Memory Card Supported : Secure Digital SD
" Memory Card Supported : Memory Card xD
storage
" Hard Drive Capacity : 750 GB
" Hard Drive Interface : Serial ATA
" Hard Drive r / min : 5400
" Optical Drive: DVD Burner
" Optical Media Supported : DVD- RAM ± R ± RW
Display & Graphics
" Screen Size : 43.9 cm 17.3 "
" Screen Type : LCD TFT Active Matrix
" HDCP Supported : Yes
" Graphics Controller Manufacturer : NVIDIA
" Graphics Controller Model : GeForce 710M
»Memory Card Graphic : Up to 2 GB
" Graphics Memory Accessibility : Dedicated
Network and Communication
" Wireless LAN Manufacturer : Atheros
Built-in Devices
»Webcam : Yes
" Microphone: Yes
" Finger Print Reader Digital : No
" Speakers : Yes
I wanted to set up an external graphics card , so I purchased a PE4H ver2.4 + PM3N and a gtx 650 ti graphics card 2 gb
I had to buy a Diy setup 1.30 software, to install the graphics card port pci express . Again my bios had to be put in Legacy for that to accept the playback format hard disk MBR .
but the software does not work in the sense that it does not recognize the PM3N . Then I remove my internal wifi card defaulting because she had to take a lot of bandwidth . But it still does not work . In addition there has shed light on the pe4h .
Thank you cordially for your help Sebastien
Sorry I'm French .
mPCIe/EC eGPU troubleshooting steps
in DIY e-GPU Projects
Posted
Nando Yes I understood what you wanted me to try. But the problem is that I do not get there has to detect your method. Maybe I took half bad. If you could explain more precisely, or I can take picture of my pc so that you can better help me.
Regards Sebastien
- - - Updated - - -
Nando Yes I understood what you wanted me to try. But the problem is that I do not get there has to detect your method. Maybe I took half bad. If you could explain more precisely, or I can take picture of my pc so that you can better help me.
Regards Sebastien