feodor_
-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by feodor_
-
-
These tables are pretty impressive. Thank you very much for your effort!
@All
In the meantime, I got my egpu setup running.
Notebook: Dell latitude e5430 (chipset HM77)
Adapter: pe4l 2.1b with 60 cm cable @ express card adapter
GFX: Palit Geforce GTX 460 (to be replaced soon)
It was really exhausting to get it running, here is what had to be done.
- a dsdt override to extend the pci bus address space to 36 bit, card still failed with error 43
- bought setup 1.3 (thanks nando!) and played around a bit..
- in the end the following configuration worked: GEN1 speed and PCI Compaction Endpoint 56.xGB (my created address space)
If I use GEN2 speed the device is shown in the device manager without any exclamation mark. But GPU-Z just shows the card, no MHz etc... And it's just not working. Nvidia system panel won't open up saying: "no nvidia gpu attached"
Is my express card slot not capable of running GEN2 speed? Is that possible?
Is my pe4l adapter malfunctioning??
Could the problem vanish with another graphics card?
Any help appreciated!
- a dsdt override to extend the pci bus address space to 36 bit, card still failed with error 43
-
_feodor has been was advised to get the latest Setup 1.30. It's 'iport g2' command confirmed to switch to Gen2 on all systems I've tested it on (Lenovo, Dell, HP).
Well, actually I haven't (been advised).. Where did you write that? :-) I was waiting for an answer for days.. So now I know and will try :-)
BTW: What else did you write as suggestions to my problem? I can't find that anywhere...
-
Thanks :-) Tried that, worked. I can see the "big memory" entry in the device manager.
Unfortunately, new issues came up
I'd like to buy the Setup 1.x, but I want to assure that my setup will work afterwards.
I own a Dell e5430 that has a tolud value of 3.5 GB. Therefore I did a dsdt override. As a result, the Error 12 is gone but the Error 43 appears now.
One time, I managed to see both the HD4000 and my GTX460 in the device manager without yellow "!".
What does not work for me is the standby-egpu on-resume fix. My notebook just performs a reboot.
The only thing that works is the F8-halt-Egpu method. Still, Error43 appears.
I use the Pe4l 2.1 which supports only PCI-E 2.0. I didn't find out exactly but my Dell Notebook maybe supports only 1.1.
Will Setup 1.x do the trick here?
Do you offer a refund in case I just can't get it running?
This it how it looks, if error 43 is gone: http://gpuz.techpowerup.com/13/11/10/cwh.png
Regards
Andreas
EDIT: Seems like I can get it running without error 43. But still without function, see screenshot above. Nvidia System Control Panel won't open, saying no Nvidia GPU attached
Any ideas??
Sometimes with ! and error 43, sometimes not. I discovered the following
The card does not seem to be mapped in the address range I created with dsdt override
Postimage.org / gallery - Unbenan3nt, Unbenannt, Unbenannt2
If I open it, there are 3 address ranges in the resources tab in device manager. 2 Seem to reside in the big memory space, 1 (the first) seems to be in the range I hat to enlarge where the internal HD4000 and all the other devices are.. Is this the problem? That there is no address space as one chunk?
Please help.. I don't know what else to try!
Will Setup 1.x help here?
T H A N K Y O U !!!!!!!!
-
Thanks :-) Tried that, worked. I can see the "big memory" entry in the device manager.
Unfortunately, new issues came up
I'd like to buy the Setup 1.x, but I want to assure that my setup will work afterwards.
I own a Dell e5430 that has a tolud value of 3.5 GB. Therefore I did a dsdt override. As a result, the Error 12 is gone but the Error 43 appears now.
One time, I managed to see both the HD4000 and my GTX460 in the device manager without yellow "!".
What does not work for me is the standby-egpu on-resume fix. My notebook just performs a reboot.
The only thing that works is the F8-halt-Egpu method. Still, Error43 appears.
I use the Pe4l 2.1 which supports only PCI-E 2.0. I didn't find out exactly but my Dell Notebook maybe supports only 1.1.
Will Setup 1.x do the trick here?
Do you offer a refund in case I just can't get it running?
This it how it looks, if error 43 is gone: http://gpuz.techpowerup.com/13/11/10/cwh.png
Regards
Andreas
EDIT: Seems like I can get it running without error 43. But still without function, see screenshot above. Nvidia System Control Panel won't open, saying no Nvidia GPU attached
Any ideas??
-
Hello,
i bought a Dell e5430 and the tolud value was too high. Thus, I tried a dsdt override.
IASL Compiler gives me just one error. How can this be fixed? Here is the output
I'd be very happy If someone could help :-)
This is the problematic area:
Scope (_SB)
{
Device (AMW0)
{
Mutex (WMIX, 0x01)
Name (_HID, "*pnp0c14") // _HID: Hardware ID
Name (_UID, Zero) // _UID: Unique ID
Name (_WDG, Buffer (0x64)
{
/* 0000 */ 0xBC, 0xDC, 0x9D, 0x8D, 0x97, 0xA9, 0xDA, 0x11,
/* 0008 */ 0xB0, 0x12, 0xB6, 0x22, 0xA1, 0xEF, 0x54, 0x92,
/* 0010 */ 0x41, 0x41, 0x01, 0x00, 0xCE, 0x93, 0x05, 0xA8,
/* 0018 */ 0x97, 0xA9, 0xDA, 0x11, 0xB0, 0x12, 0xB6, 0x22,
/* 0020 */ 0xA1, 0xEF, 0x54, 0x92, 0x42, 0x41, 0x01, 0x02,
/* 0028 */ 0x94, 0x59, 0xBB, 0x9D, 0x97, 0xA9, 0xDA, 0x11,
/* 0030 */ 0xB0, 0x12, 0xB6, 0x22, 0xA1, 0xEF, 0x54, 0x92,
/* 0038 */ 0xD0, 0x00, 0x01, 0x08, 0xE0, 0x6C, 0x77, 0xA3,
/* 0040 */ 0x88, 0x1E, 0xDB, 0x11, 0xA9, 0x8B, 0x08, 0x00,
/* 0048 */ 0x20, 0x0C, 0x9A, 0x66, 0x42, 0x43, 0x01, 0x00,
/* 0050 */ 0x21, 0x12, 0x90, 0x05, 0x66, 0xD5, 0xD1, 0x11,
/* 0058 */ 0xB2, 0xF0, 0x00, 0xA0, 0xC9, 0x06, 0x29, 0x10,
/* 0060 */ 0x4D, 0x4F, 0x01, 0x00
})
Name (INFO, Buffer (0x80) {})
Name (ECD0, Zero)
Method (WED0, 1, NotSerialized)
{
Store (Arg0, ECD0)
Return (Zero)
}
PS: The rest is only remarks, warnings and optimizations, I guess they are ok??
eGPU experiences [version 2.0]
in DIY e-GPU Projects
Posted
Ok, thanks.
I will try another card. By the way: Never buy a Palit card, it was as loud as a vacuum cleaner.. Can't really recommend it!
That happens, when you only look at the price
Regards
Andreas