Pender666

Prema, I'm using P375SM here and would like to know if HPET is enabled on default or where I can enable it.

Thanks in advance

Yep!

"pdr region does not exist

gpr? region does not exist"

These are optional parts of the ME Firmware that are not used on these models!

As for the EC2 ID.

Clevo originally planed to only use it for the additional light control on the P375SM model, but later decided to include extended keyboard light functionality on P370SMx, too.

(It is also mentioned in the readme that this is normal and has to be confirmed with "YES")

These are the new functions (need to update hotkey driver to 8.0124 or later):

Add 3-zone light control for backlight keyboard

Fn + keypad “7” key to control left zone light

Fn + keypad “8” key to control middle zone light

Fn + keypad “9” key to control right zone light

Add Fn + keypad “5” key to control touchpad light function

Here the new Hotkey Apps:

Win 8.1: ftp://ftp.clevo.com.tw/P1xxSM/OTHERS/Hotkey_W81.zip

Win8: ftp://ftp.clevo.com.tw/P1xxSM/OTHERS/Hotkey.zip

ENJOY the Mod!

It works with 7.0026 on Windows 7 too. I'm using the sager one.

http://files.sagernotebook.com/Sagernotebook/misc/07Hotkey_70026.exe

Set OS to Win 8.1 and UEFI to enabled, only then it will use the BGRT boot logo during Windows boot up sequence.

Where can I change OS to win 7?

In uefi I can choose others and windows 8.1 only

Edit: no need, setting the video oprom policy to uefi only worked!!! Thanks

But to use Windows 7 in uefi shouldn't I sett uefi mode to others? Or can I change to 8.1 and still run win7?

Prema, does your bios for P375SM has the video drivers built for uefi mode?

I'm asking because your boot logo is in low res and the windows boot logo too.

Dual nvidia 780m here!

Thanks in advance

Thank You Prema!!! Sager 9390 (375SM) here!!!

Bios updated to Clevo stock then PremaMod.

Procedures smooth but each second is painful!!!! Hehehe

Have some beer!!! 0MJ46412AA888431B

Try this!

To resolve this problem, restart your computer.

If the problem persists, start the computer by using the Windows CD or by using an emergency startup disk, and then delete the Hiberfil.sys file. To do this, follow these steps:

1. Insert your Windows XP CD-ROM into the computer's CD-ROM drive or DVD-ROM drive, and then restart your computer from the CD-ROM.Note Some computers may require that you modify the basic input/output system (BIOS) settings before you can start the computer from a CD-ROM. For information about how to modify BIOS, see your computer documentation.
   
2. When the "Welcome to Setup" screen appears, press R to start Recovery Console.
   
3. If your computer is configured for dual booting or multiple booting, select the relevant Windows XP installation.
   
4. When you are prompted to do so, type the administrator password, and then press ENTER.Note By default, the administrator password is blank in Windows XP Home Edition.
   
5. By default, Hiberfil.sys is typically located in the root directory (C:\). At the command prompt, type del hiberfil.sys, and then press ENTER.
   
6. Restart the computer.
   

I always use Vsync because screeen tearing annoys me a lot! @killerpc, Yes, it does. It turns Vsync on when you are over 60fps and turns Vsync off when its less than 60.

I'm using a Tritton AX 720 true 5.1 surround sound. It has a dolby decoder connected to a soundblaster x-fi pro 5.1 usb with Dolby Digital Live through SPDIF out.

Great headset, TRUE 5.1 and you can get on on ebay for $50.00 or less.

ETA is "Estimated Time of Arrival"

In other words, it's done when it's done.