heX
-
Posts
9 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by heX
-
-
Thanks Tech Inferno Fan, disabling my dGPU worked, optimus is functioning correctly, however, I cannot seem to use my intenal LCD display. Where is said option located?
-
-
Do I need to disable the dGPU to run optimus? Thanks
....I have a Lenovo y560 with an i5 560m - Intel HD. Also a HD 5730 as a dGPU, -
The switchable graphics option enables the dGPU on the pci-e bus and there is no way to otherwise disable it on a Y460/Y560. So how are you switching off the dGPU to not be on the pci-e bus?
In that case I'm not disabling it, it's just not functioning correctly. The thing is I did manage to get everything working everything except optimus...unless I do need to free the pci-e bus to make it work. Thanks for the reply.
Edit: I just noticed that all three cards are working and none have any errors, my internal uses Intel HD and my external my 660 Ti.
-
How are you manually disabling the dGPU? There is no option in the Y460/Y560 BIOS to do it.
-
Lenovo tends to disable the needed iGPU if boot with the eGPU powered up. A solution there is to either use the PCI Reset Delay (SW1=3, 6.9s) on a PE4L so can bypass that check with a coldboot OR hotplug the eGPU after bios has booted by halting Win7/8 with F8/12. Load the stock Intel HD driver from Intel's website too. It may also be necessary to disable the dGPU either via a BIOS option (if it exists) or using Setup 1.x. That Setup 1.x page shows how a youtube video of how to configure a eGPU using a Lenovo Y460, which would be similar to your Y560.
Thanks for your reply. I did manage to install the eGPU but it only works using an external display and there's no optimus option. My PE4L is set to SW1=3. The problem is that I don't seem the have an optimus option, is it automatic or do I need to enable it in the BIOS? Also, my intel HD remains active on my main display and I can disable my dgpu manually.
-
Sorry for that, I have a Lenovo y560 with an i5 560m - Intel HD. Also a HD 5730 as a dGPU,
-
Hello, i'm trying to enable optimus for my 660 ti. The desktop driver installs successfully but i can't find the option to enable nvidia optimus from the control panel. Is there anything i'm missing here? Thanks
Edit: I'm using the Windows 8.1 beta driver.
eGPU experiences [version 2.0]
in DIY e-GPU Projects
Posted
Thank you again. Everything is working as intended. One last question, how do I know if i'm running x1.1Opt?