beatlep
-
Posts
12 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by beatlep
-
-
Prema, will you release a bios mod for the P570WM with GTX 980M support?
-
Well, thanks for the quick response.
Thursday i will try to make the clear cmos and if don't work i will contact you to send me the preprogrammed bios chip.
-
I will try to make a clear cmos if this don't work a pre-programmed BIOS chip can be a good solution, but i have to solder it? I have no idea how to do it.
I will make a clear cmos thursday, now i don't have a correct screwdriver to do it and tomorrow is closed everywhere.
-
Nothing, the system don't reboot and the display show nothing.
How do i make a clear cmos in the p570wm ?
I have to dismount the entire laptop to do it ?
-
Was the system beeping with capslock, scroll lock, and numlock flashing? Clevos do this when the laptop can't detect gpu temps. They also automatically power off after about 2 minutes when this happens.
Yes, exactly.But then i removed the battery and was only the hdd led flashing.
I tried to do the recovery from prema's page but don't work, the display show nothing.
And i didn't found a stock v10 bios for the P570WM with the EC v08 like prema bios v2.
-
Well, i just bricked my P570WM.First i flashed prema bios v3 and went well but the vga (gtx 680m) was at 75ºc and not was down from there without doing anything.
Then i try to revert back to prema bios v2 and betwen steps i press f7 and the system beep all the time, in step 3 when it was at 50% flashing the main block it shutdown...and thats all.
The system don't boot and even the display show nothing, only the hdd led blink and then half a minute later shutdown.
There is a solution or i wasted 2000 € in 6 months ?
-
Restart disable the overclock in P570WM v2 bios , turn off the laptop not.
Will you fix this in next versión?
Thanks.
-
In prema bios mod v2 for P570WM when i reset Windows when i back to Windows the overclocking, made in bios via turbo override, is gone, however when i power off the laptop and later power on the laptop the overclock is not gone.My cpu is a i7 3820.
-
how much was it?
-
Make sure you have set Windows and Clevo control Center to Power mode, Turbo works on all CPUs that we have tested with the Mod.
Also keep in mind that 3.8Ghz is only the maximum one core Turbo of that CPU. 3.6Ghz and less is normal while using more cores...
-
Hello, I just got a Clevo P570WM ( XMG U702 SCHENKER ) with a i7 3820 cpu and i have the problem that turbo boost not work at all, always is at 3600 MHz.I installed PREMA BIOS MOD, and turbo boost don't work even with this bios mod? what can i do? Can i replace the i7 3820 with a i7 3930K so overclocking finally works? Thanks.
[BIOS/vBIOS - MODS] Prema Mod™ & Stock
in Clevo
Posted
Then Prema Mod Bios v.4 support GTX 980M ?