Per Kristian Sørpebøl

Crazy that it works as good as it does. Went from 89C at 810/940 to ~78C at 854/1000. No 3DMark11 since I can't get it to recognise any of my hardware

Am I lucky? I can use XTU with 3630QM on P150EM, everything is unlocked, is it the core current limit I have to use to get higher reference clock? can't get higher than 107 MHz

Throttlestop gets rid of throttling that I got when using the discrete gpu. It would be nice though to not need to run TS.

What settings are you using for ThrottleStop?

There is definitely something wrong. Your idle temps should be around 50C.

Check your heatsink, maybe the contact with your cpu is not optimal.

It's just me being stubid, EVGA precision X had five processes of voltage tuner at the same time using 75% of the CPU.

Now it is at 45-49 degrees and much more quiet

clevo sells their laptops with bent heatsink plates so that it is impossible to get good die contact without lapping heatsinks. You can somewhat compensate by using a large amount of thermal paste, but flattening out the heatsink is the only true fix. I sanded mine flat on the edge of a countertop with 800 grit sandpaper. Arctic silver is an outdated thermal paste. I suggest IC Diamond instead.

Yeah, I see what you mean, my idle temp on CPU is 77-80 Celsius.

If I turn the fans to max with FN+9 it can't get lower than 72

My 675MX idles at 40 Celsius so there is probably something wrong

Can we expect something new for P150EM?

I got a question about cooling.

Is there any way to cool a NP9150? Should I use arctic silver on CPU and GPU. I can get 855 Core - 950 Memory, but then it reaches 90 celsius.

I tried higher and i can see that it's stable but it throttles it down to 600 core

Where you edit power plan? in advanced it says shutdown too.

I have it set like this:

Which means shutdown

Is it only me?

When using this BIOS with P150EM, when I shutdown it just log off and turn off the screen, as soon as I move the mouse it is at the login again.