Malig

I applied the 1025 dell 680m bios to my cards but only the primary card overclocks the secondary still maxes out at 719. Also using afterburner I can set the primary card to +400 but the secondary only +135 but of course it still doesn't do the 135oc in game.

nevermind, i didn't actually apply the bios to the seconardy, used the command wrong lol

with 1050v my max stable OC is 1071/5000. Im looking to get a vbios for 1075v and 1.1v since my temps are great and want to push past 1100 on the core. Hoping one gets sent to me soon!

What kind of temps are you looking at with 99% utilization?

Hmm I just used IC Diamond and at first the temps for my secondary gpu were about 10 degrees cooler than my primary running a bench but after idling/reboots etc then benching again about 15mins later the temps became about 4 or 5 degrees higher than the primary, makes no sense.

Had a tech help me replace the motherboard today because the flimsy plastic arm holding the hdd cable broke off and guess what, I insert the cable and hdds were not detected so opened it back up and tried to reseat the cable and the damn thing broke off in the new motherboard. What kind of cheap plastic junk are they using? They had to send a new motherboard just because of that piece of plastic the first time so I guess I'll just forget about it. Luckily using some tweezers I was able to get the thing to barely hold.

Tressfx certainly kills framerates especially in close up shots. Looks amazing though.

Not 4.5GHz because it requires too much flex. I could do it, but it would be running warmer than I would like it to be. Plus, with an over-volted vBIOS it will sometimes turn off under extreme combined CPU and GPU load with only 330W available.

But, as I showed abpve, 4.3-4.4GHz is no problem because I can run with lower flex and pri plane. I ran benchmarks on 9 games without overheating. I did use a slightly more aggressive fan profile. Had the fans boosting to 100% at 75°C. It isn't necessary for gaming... having FPS that high is well beyond what is required for an excellent gaming experience. I only did it to prove a point to a dufus on a different forum.

I fixed the header in the second graph on the top row to read Arkham City.

What bios version and settings are you using for 4.3/4.4? I'd like to use a good 24/7 gaming oc.

What kind of overclock are people with dell 680s running with the 1025/1050 file? I have an M18x-R2