Jump to content
EwinRacing Flash Series Gaming Chairs
aaurnab

Lenovo Thinkpad P50

Recommended Posts

Is there any information for Latest Thinkpad P50 eGPU setup,

System wont run When I connect Pe4l 2.1b with express card . Please give me Ideas....

Share this post


Link to post
Share on other sites

Today is great day, I can start using my eGPU setup again on my new Thinkpad P50, but I can not disable completely discrete Nvidia 1000M card so I will not geting full GPU performance 100%.

Edited by aaurnab

Share this post


Link to post
Share on other sites

Hey dude,

 

Glad to hear your expresscard eGPU is now working with the P50, What did you do to fix this?

I currently have a T420s and want to upgrade to a P50. Would you recommend it? How is the battery life and do you think it will support Thunderbolt eGPU?

 

Thanks

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By alexey621
      Hello, I have several Lenovo L530 notebooks, but there is no wi-fi adapter inside. I tried to use my wi-fi adapters, but whti every adapter I have an error "1802 unauthorized network card is plugged in". I have already used all available wi-fi adapters, but no result. I really need professional help and I hope I find it here. As far as I understand there is a way to remove whitelist in BIOS, so here's the file with my BIOS dump.
      https://disk.yandex.ru/d/GcILQafHeDzxZw
      Hope you can help me with BIOS mod. Thanks in advance. 
      P.S. Sorry my English, I'm from Russia
    • By FlubDaBlub
      Hi all! I am wondering if it's possible to remove the bios whitelist easily. Because of the whitelist, my external gpu setup that I got recently refuses to work. If it helps at all, I know that the wifi card that used to be in the slot was the intel 8265ngw. Here's the bios link if that helps too: laptops and netbooks :: thinkpad x series laptops :: thinkpad x380 yoga :: 20lj :: 20ljs20n00 :: mp1e15eb - Lenovo Support US
      Thanks for your help!
    • By Tech Inferno Fan
      We've had a stack of recurring questions from with problems getting a mPCIe eGPU working. This includes GPU-Z not reporting no clock details, error 10/43 or even not being detected at all. Overall it's more troublesome getting mPCIe working than say expresscard or Thunderbolt.
       
      Here's some common problems and some troubleshooting steps to correct them.
       
      Getting a black bootup screen, resolving error 10/43 or ACPI_BIOS_ERROR win bootup messages
       
      Here the BIOS doesn't know what to do when it sees an eGPU. So the solution is to not let the BIOS see it. Do that by setting the delays on the eGPU adapter (CTD/PTD - EXP GDC or CLKRUN/PERST# on PE4L/PE4C). Boot with eGPU adapter in the wifi slot into Setup 1.30 or Windows. Is the eGPU detected?
       
      I'll add that should error 43 continue AND you have a NVidia dGPU as well as NVidia eGPU then it's likely because of having the mobile NVidia and desktop NVidia drivers loaded simultaneously. Proceed to uninstall ALL your NVidia drivers, use "DDU" to clean NVidia registry entries and do a 'clean' install of the latest NVidia desktop driver.
       
      mPCIe port that hosted the wifi card disappears when connecting an eGPU in it's place
       
      Use the Setup1.30 PCIe Ports->enable to enable the missing port.
       
      eGPU does not get detected
       
      Overcome mPCIe whitelisting by booting with the wifi card and then hotswapping in the eGPU. That way the BIOS will enable the mPCIe port to work.
       
      1. Boot with wifi card into Windows, sleep system, swap wifi card for mPCIe eGPU adapter and ensure eGPU is powered on, resume system. Do a device manager scan in Windows. Is the eGPU detected?
       
      2. Boot with wifi card into Setup 1.30 *carefully* hotplug the eGPU adapter in place of wifi card. Hit F5 to rescan the PCIe bus. Is the eGPU detected?
       
      If this enables detection then avoid this tedious hotswapping by seeking a unwhitelisted modified BIOS for your system OR test the Setup 1.30's PCI ports->undo_whitesting feature.
       
      eGPU still not detected - set the PSU to be permanently on
       
      The latest EXP GDC and BPlus eGPU adapters try to manage the PSU to only power on after they detect a signal. This can cause a race condition where the eGPU isn't ready to go when the CLKRUN signal is asserted.
       
      Avoid this by jumpering the PSU so it's permanently on rather than being managed. Depending on the PSU you are using refer to the following doco on how to do that:
       
      http://forum.techinferno.com/enclosures-adapters/8441-%5Bguide%5D-switching-atx-psu-using-paperclip-trick-swex.html
      http://forum.techinferno.com/enclosures-adapters/9426-220w-dell-da-2-ac-adapter-discussion.html
       
      eGPU still not detected - a non-standard mPCIe implementation by your vendor?
       
      PERST# mPCIe pin 22 may need to be isolated due to a non-standard implementation by your notebook vendor: http://forum.techinferno.com/enclosures-adapters/10812-pe4x-series-understanding-clkreq-perst-delay.html#post142689
       
      eGPU still not detected - faulty hardware?
       
      If you still don't get detection then test the video card and eGPU adapter in another machine to confirm neither is faulty.
       
      NVidia driver stops responding
       
      EXP GDC, PE4H 2.4 and PE4L 1.5 all use a socketted cable and therefore are not true Gen2 compatible device. This error indicates there was transmissions errors.
       
      The solution is either to get a better Gen2-compliant eGPU adapter such as PE4C V3.0 or PE4L 2.1b (both with soldered cable), or downgrade your link from Gen2 to Gen1 using BIOS options or Setup 1.30
       
      Other troubleshooting help resources?
       
      See DIY eGPU Troubleshooting FAQ.
       
    • By ReverseEffect
      3dMark11 Performance Preset Benchmark: http://www.3dmark.com/3dm11/11262792
       
      Required items:
      1.) Lenovo u310 (I have a Core i3 - Ivy Bridge, 8GB RAM)
      2.) 65CN99WW unwhitelisted.
      3.) eGPU (I used a EVGA GTX 750 Ti from another computer I had).
      4.) EXP GDC mPCIe Edition adapter (got from eBay - banggood seller).
      5.) ATX power supply (I used a 600W PSU from another computer I had).
      6.) USB wireless.
      7.) External monitor, keyboard, and mouse.
       
      Steps:
      1.) Obtain and install a unwhitelisted BIOS. If you are unable to obtain a unwhitelist BIOS, I think it might be possible to bypass it with Tech Inferno Fan's Setup 1.x (may need confirmation as I haven't used it myself yet.)
      2.) Shutdown computer and remove all USB devices, ethernet cables, power cables, card reader cards.
      3.) Remove mPCIe wireless card and detach antennas.
       
       
      4.) Attach EXP GDC external mPCIe cable to the former wireless slot and screw down.
       
       
      5.) Attach HDMI end of the mPCIe cable adapter to the EXP GDC device.
       
       
      6.) Attach graphics card to the EXP GDC device (I moved my laptop off the desk and onto the side shelf to make room on the desk for the monitor/keyboard/mouse).
       
       
      7.) Using the power cable adapters that came with the EXP GDC device, I hooked in my ATX power supply's 20 pin and CPU 4 pin cables. Then hooked the other end (8 pin) into the EXP GDC device. My EVGA 750 Ti also required that I use an additional PCIe power cable (6 pin) in the top of the card.
       
       
       
       
       
      8.) Then I attached my misc devices (HDMI monitor, USB keyboard/mouse/wireless adapter), and hooked in my PSU and powered it on (below is image of final product, also moved HDMI cable out of the way).
       

       
      9.) Power on your computer and let it install the standard VGA drivers and then install your drivers (I didn't have to go in the BIOS for any graphics settings, which it doesn't have anyways, nor did I have to disable iGPU in Device Manager before the card was added).
       
      Extra Info:
      I found that most games will play on med settings with about 45 FPS with this particular card.
      BDO: Upscale on - Anti Aliasing on - SSAO off - med settings.
      Skyrim: Med-High settings.
      Fallout 4: Med settings.
       
      (EDIT 5/19/2016) > Images added.
       
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.