Jump to content
EwinRacing Flash Series Gaming Chairs
Sign in to follow this  
flyingfishfinger

mPCIe eGPU on Thinkpad X61 - Error 43

Recommended Posts

Hi all-

At risk of creating yet another error 43 thread, I have a few questions or issues that I haven't been able to resolve following all the various guides and tutorials.

I have a Quadro K610M in a custom PCB connected to my Thinkpad X61 running Windows 10 x64.

I know that the PCB has some issues, but I've accidentally gotten further than this before and now lost that progress. I've done so far:

 

- DSDT override to achieve Large Memory works, this solved Error 12 (on the other hand, what drive is "v:" where I should put the DSDT.AML? Startup.bat can't ever find it...)

- Setup 1.3 for PCI compaction, I set it to 56.25GB and then said compact both iGPU and eGPU into 32-bits. I've tried various other combinations without success.

- Using driver 362.13, the installation went fine.

 

For the life of me I can't figure out what to do differently, I've reinstalled the driver with DDU several times to the same effect.

Anyone have particular suggestions?

Thanks in advance!

 

Rafael

Edited by flyingfishfinger

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Similar Content

    • By zex4
      Hey everyone
       
      After notebookreview was gone (RIP) I believe that I am in the right hands here..
       
      I have one gaming clevo P775TM1-G with original i7-8700 and gtx 1060 (Latest Unlocked stock bios) more then two years now...
      only what i changed was the display to 1080p 60hz non Gsynch time ago for better color representation....
      but unfortunately the graphics card is dying now...could not find any cheap for now but i have almost new clevo non Gsynch gtx 970m MXM3.0B 6gb on my hands....
      would use the 970M for now as lightweight gamer and creator....The card itself  fitted well but of course the heatsink not....luckily i found a cheap (35€) Clevo P775DM heatsink in good condition that fitted perfectly....
       
      The clevo started into bios and the 970M was detected like the 1060 so i tought everything was fine until i getting blackscreen after bios
      i can hear that he boots to login screen...i can hear my custom startup sound...but that was all..of course i unistalled the drivers from 1060
      before and the panel i have is also non gsynch so i tought it should work otherwise i need a different bios or vbios i think
       
      would be glad if someone can help me out of this
       
      Best regards
       
       
    • By IveGotRoot
      I have recently upgraded my laptop(an M6800 firepro 6100) and replaced it with an GTX 980m. Nvidia says that the latest driver(461) supports my card but i can only install up to 388.13 Ive tried to mod it but i can't figure it out. I can run the latest linux driver tho
    • By thinkdad
      Hi,
       
      I need help in fixing my Thinkpad.

      I just got a T440p yesterday. It was working perfectly until the following:

      I reinstalled Windows and then I installed Vantage.

      I installed all the latest drivers.
      I also choose to install the bios update. The bios update ran in Windows and it asked me to restart. After restarting, the screen was blank. I tried powering it off and on and I saw the Thinkpad logo but after that the screen was blank.

      I tried powering on and off again and there's no Thinkpad logo now and the screen is just blank with the green power on. No sound, no nothing.


      Here's what I tried:
      Pressing the power button 10 times and then holding it for 30 seconds. Unplugged and battery is detachted Detached the CMOS battery and the reattached it Removed the ram, harddisk and optical disk drive. Attached the battery and inserted the charger. I turned it on and there was a couple of beeps Tried pressing FN+R and created a bootable USB I'd like to ask: How do I fix this? What do I need to do?
      Can I reflash the bios in some other way? Do I need to buy a new motherboard? Will this solve the issue? It's my first thinkpad and I'm really excited but I was bummed out that this happened. Can you please help me?

      Thanks in advance!
    • By [email protected]
      Hi Everybody,
       
      I am the owner of a HP elitbook 8770W, an old but still very decent notebook.
      I've upgraded the GPU several times , first with a GTX 970M and a while later with a GTX 1070 mobile.
      I've bought those cards from pretty reliable sources (a seller on Ali I know pretty well) and I knew beforehand that the cards were compatible with my 8770w.
      Unfortunately, my 1070 broke down due to heating issues.
       
      Now I can get my hands on a Quadro P5200. The original ones don't have a EEPROM chip soldered on the board, and rely on the notebook VBIOS.
      However, the one I want has a BIOS chip soldered on the board with a HP max-q bios, which would be perfect for me.
      Well, if it's compatible of course.
      The seller cannot give me a statisfactory answer to that and I'm not sure they are willing to refund me if this is not the case.
       
      Now on to my concrete questions:
      Does the build-in notebook VBIOS matter if there is a chip with a bios on the mxm card itself? If it does matter, since my notebook does recognize other pascal cards like the 1070 and 1080, is it wild to assume that a P5200 will also be recognized? They all seem to have a 86.04.x.x.x BIOS. Is there any way to check the notebook VBIOS compatibility against the one on the card?  
      Thank you in advance!
       
    • By [email protected]
      Hello !
      I tried a tutorial on the forum to remove the supervisor password on a X260 thinkpad but the winbond 25Q128FVPQ chip is not recognized with the programmer CH341A and ASprogramer (does not detect automatically and not manually). Plugged into the motherboard with a soic8.

      Can you help me with detection?
      Can I find the password with the software or do I have to write it?
       
      Thank you so much !!!
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.